User manual PANASONIC KX-FP250

[. . . ] For assistance, visit our website: http://www. panasonic. com for customers in the U. S. A. or Puerto Rico. Table of Contents Introduction Your phone . 8 Editing a caller's phone number before calling back . 27 Storing caller information into the phonebook . [. . . ] L The paged handset will beep for 1 minute. Handset 2: Press {C}, {s}, or {INTERCOM} to answer. When finished talking, press {OFF} or place the handset on the base unit or charger. 2 3 2 For assistance, please call 1-800-211-PANA (7262). 29 Intercom Features Transferring a call (KXTG2422 only) Outside calls can be transferred from one handset to the other. Conference calls (KXTG2422 only) A conference call allows 2 handsets to speak together with an outside party. 1 2 3 During an outside call, press {INTERCOM}. To page the other handset, press {handset[1]} or {handset[2]}. L The paged handset user can answer by pressing {C}, {s}, or {INTERCOM}. L If there is no answer, press {C} or {s} to return to the outside call. To complete the transfer, press {OFF}. 1 2 3 During an outside call, press {INTERCOM}. To page the other handset, press {handset[1]} or {handset[2]}. When the paged party answers, press {Conf} on your handset to establish a conference call. L "Conference" will be displayed. The other 2 parties can continue the conversation. 4 Transferring a call without speaking to the paged party 1 2 During an outside call, press {INTERCOM}, then press {handset[1]} or {handset[2]}. Press {Save}, then press {OFF}. 6 For assistance, please call 1-800-211-PANA (7262). 31 Voice Mail Service Turning VM detection on/off L If your Voice Mail service uses Voice Mail tones and the message is over 3 minutes long, the handset may not indicate new messages. L If your Voice Mail service uses Voice Mail tones, the tones will be heard from any phone connected to the same line. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually. 1 2 3 4 5 6 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "Voice Mail" by pressing {V} or {^}, then press {>}. Scroll to "VM tone detect" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select "On" or "Off". Press {Save}, then press {OFF}. Message alert You can select whether or not the message indicator on the handset will flash when new messages have been recorded. The default setting is OFF. Listening to Voice Mail messages The unit will let you know that you have new Voice Mail messages in the following ways: ­ "Voice Mail" will be displayed on the handset. ­ The message indicator on the handset will flash slowly if message alert feature is turned on. 1 2 3 4 5 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. [. . . ] You must mail-in your product during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. [. . . ]