User manual PANASONIC KX-HCM270

[. . . ] Network Camera Operating Instructions Model No. KX-HCM270 Please read this manual before using and save this manual for future reference. Panasonic Network Camera Site: http://www. panasonic. com/netcam for customers in the USA or Puerto Rico Operating Instructions Introduction Thank you for purchasing a Panasonic Network Camera. Check the following items when unpacking. Network Camera Operating Instructions Getting Started AC Adaptor Flexible Stand Sunshade Setup CD-ROM Rubber Cap Putties Self Bonding tape Connector Cover Screws Screws for Flexible Stand For operation assistance: Call 1-800-272-7033 Refer to the Panasonic Network Camera Site http://www. panasonic. com/netcam -- 1 pc. [. . . ] The selected language is displayed as the initial language on Top Page, Single Camera screen and Multi-Camera screen. All Setup windows are also changed when selecting English (US), English (UK) or Japanese. English (UK) is displayed on Setup windows when selecting French, German, Italian or Spanish. 68 Operating Instructions Instructions for the data fields Top Page Top Page title can be changed. Refer to unavailable character set 1 on page 108 but [space] is available. Refer to displayable character set on page 109. Network Camera picture on Top Page can be changed. Enter the URL (http://) to display the picture on the specified web site. Only [space] and ["] are unavailable in the ASCII character table on page 108. Network Camera picture on Top Page can be set the link to the specified web site. Only [space] and ["] are unavailable in the ASCII character table on page 108. Image Resolution 640 x 480 (cannot set on the Multi-Camera screen. ) 320 x 240 (default) 160 x 120 Favor Clarity: Image is optimized for good clarity. (default) Favor Motion: Image is optimized for enhanced motion display. Image Quality Refresh Interval The refresh interval of JPEG - Regularly Refresh can be selected. 10 seconds to 5 minutes Limit time of Continuous Motion JPEG To make the network traffic smooth, select the duration time to display Motion JPEG. When the timer expires, the image changes to JPEG - Regularly Refresh. 10 seconds to Unlimited On the Air time Specifies the timetable to allow users to access Top View Image screen. When you access the image except the specified time, blue screen appears. Always: Always allows users to access. Operational between: Specifies the date and time to access the image. [For assistance, please call: 1-800-272-7033] 69 Operating Instructions 3. 5. 7 Image Transfer Image Transfer window can set the Image Transfer feature. Network Camera can buffer images and send the images via e-mail or FTP. The request to send the image is initiated by a contact closure from the external sensors/devices connected to the External I/O using the Alarm mode. The external sensors/ devices are customer provided. The images can also be sent in the interval of time using the Timer mode. Make sure Date and Time has been configured. Note When you use FTP or e-mail in transferring the image, you need to set Default Gateway and DNS Server address. Non Transfer : Image Transfer feature is not in use. Alarm mode Timer mode : The alarm trigger activates transferring the image. [. . . ] It provides 11 Mbps transmission in the 2. 4 GHz band using only DS-SS. It allows the wireless communication without complicated cabling. Infrastructure Infrastructure mode is one of the wireless network system in which devices communicate with each other by first going through the wireless router. In infrastructure mode, wireless devices can communicate with each other or can communicate with a wired network. [. . . ]