User manual PANASONIC KX-HGW200

[. . . ] Broadband Networking Gateway Operating Instructions Model No. KX-HGW200 PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web Address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 62 before use. Read and understand all instructions. Thank you for purchasing the Panasonic KX-HGW200. Attach your purchase receipt here. (found on the rear side of the unit) Name and address of dealer Date of purchase 2 FOR OPERATION ASSISTANCE: --Call 1-800-272-7033 --Refer to the Panasonic world wide web site http://www. panasonic. com --Refer to the support function of the KX-HGW200 administration web screen (See p. 44. ) NetWare®, Novell® and IPXTM are trademarks or registered trademarks of Novell, Inc. [. . . ] If the software file was downloaded from the Panasonic support site, download it again. If the software file was copied from a floppy disk or compact disk, make sure the disk that contains the software is not broken. Your selected software file is not for the KX-HGW200. Reselect the proper file and update it again. Your selected software file is not for the KX-HGW200. Reselect the proper file and update it again. OR Make sure your KX-HGW200 hardware version matches the software file by reading the readme file that comes with the software file. The KX-HGW200's internal memory has been depleted. Restart the KX-HGW200 and update it again. File is not ELF format Selected file is invalid Not enough memory 40 " PPPoE Connection The PPPoE Connection command allows you to manually initiate/stop your KX-HGW200 PPPoE connection to the ISP. Depending on the PPPoE connection status, two different kinds of web screens appear. You can initiate/stop the PPPoE connection by clicking the button on the web screen. Note: To use this command, the PPPoE connection of your KX-HGW200 must have been set to Automatic or Manual on the KX-HGW200 administration web screen. When the PPPoE connection is being made The window below appears. Using the Web Screen 1 To disconnect the PPPoE connection, click [Disconnect]. When the PPPoE connection is not being made The window below appears. 1 To initiate the PPPoE connection, click [Connect]. For assistance, please call: 1-800-272-7033 41 " Using the Functions Status The Status function allows you to view the KX-HGW200 serial number, the hardware and software version information and the device status of the KX-HGW200. This information may be helpful if you need to contact the Panasonic customer service center for assistance with the KX-HGW200. 1 Click [Status] on the KX-HGW200 administration web screen. The screen below appears. Usage Data The Usage Data function allows you to view the KX-HGW200 statistics. This information may be helpful if you need to contact the Panasonic customer service center for assistance with the KX-HGW200. 1 Click [Usage\Data] on the KX-HGW200 administration web screen. The screen below appears. 42 " User Registration The User Registration function allows you to connect to the web site for registration. To help you register, the KX-HGW200 collects and displays the hardware and software information of your KX-HGW200. You do not have to register the information of a particular item if you don't want to. 1 Click [User\Registration] on the KX-HGW200 administration web screen. The screen below appears. Your KX-HGW200 hardware and software information parameters are shown in each box. Using the Web Screen If you don't want to register the parameters of an item, select Do not send from the drop-down list. To undo the current settings, click [Undo]. Note: It is recommended that you register all the information so that our servicenters may best assist you in the future. 2 Click [Submit] to register your KX-HGW200. You will connect to the Panasonic support web site. For more detailed information, follow the instructions of the web site. For assistance, please call: 1-800-272-7033 43 " Using the Functions Support The Support function allows you to connect to the Panasonic support web site and to transmit the KX-HGW200's hardware and software information to the support team for assistance. You do not have to register the information of a particular item if you don't want to. 1 Click [Support] on the KX-HGW200 administration web screen. The screen below appears. Your KX-HGW200 hardware and software information parameters are shown in each box. If you don't want to register the parameters of an item, press the arrow mark at the right of each parameter and select Do not send. To undo the current settings, click [Undo]. [. . . ] 42 User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 66 W wall template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 29 web browser software . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]