User manual PANASONIC KX-HN6001E

[. . . ] System Setup Guide Home Network System HUB Model No. KX-HNB600E Thank you for purchasing a Panasonic product. This document explains how to configure the hub and access it using a mobile device. These steps must be followed before you can use the system. For details about how to use the system, refer to the User’s Guide (page 18). [. . . ] Refer to the information about the available microSD card (page 3). R To remove the microSD card, push in the microSD card and then remove it. 6 2 1 Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use. ) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. 12 Helpline Tel. 0330 3331112 Ireland 01 4475228 PNQX7276YA_HNB600E_(en_en)_1220_ver. 200. pdf 12 2017/01/12 2:40:54 Setup Power failure R The hub will not work during a power failure. R The hub’s telephone features will not work during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. Compatible mobile devices iPhone 4 or later, iPad, or iPad mini (iOS 6. 0 or later) or an Android™ device (Android 4. 0 or later) Note: R The [Home Network] app may not function properly depending on the system environment, such as the model of your mobile device, peripherals connected to your mobile device, and the apps installed on your mobile device. R The following Android devices are not compatible with the [Home Network] app. – Android devices that are not supported by Google Play – Android devices with limited hardware features (Bluetooth, Wi-Fi, and microphone support are required. ) Wi-Fi® settings After you have connected your hub, here is what you will need to do in order to access the system from your mobile device. Each procedure is explained in this chapter. 1 2 Download Download the [Home Network] app to your mobile device. Initial setup Use the [Home Network] app to configure the hub to connect to your wireless router, and then register your mobile device to the hub. Initial setup Confirm the following before you begin. – Make sure you have installed the [Home Network] app on your mobile device – Make sure the hub and your wireless router are turned on and the hub’s LED indicator is lit in yellow – Make sure the hub is located within range of your wireless router – Make sure your mobile device is connected to your wireless router – Make sure your mobile device can connect to the Internet – Make sure you know the network name (SSID) and password assigned to your wireless router Downloading the [Home Network] app Download information is available at the web page listed below. www. panasonic. net/pcc/support/tel/ homenetwork/ Initial setup for iPhone, iPad 1 Start the [Home Network] app. R If prompted, follow the on-screen instructions and select the appropriate region/country. R If prompted to select the device to be set up, tap [Hub]. When prompted, press MWi-Fi SETUPN on the hub. R The LED indicator blinks in yellow. 2 3 Helpline Tel. 0330 3331112 Ireland 01 4475228 13 PNQX7276YA_HNB600E_(en_en)_1220_ver. 200. pdf 13 2017/01/12 2:40:54 Setup 4 Change your mobile device’s Wi-Fi setting temporarily so that it connects to the hub directly. R Open your mobile device’s [Settings] app, tap [Wi-Fi], select “KX-HNB600_Panasonic”, enter “00000000” as the password, and then tap [Join]. R If more than 1 item named “KX-HNB600_Panasonic” is displayed, wait approx. 10 minutes and perform this procedure from the beginning. If necessary, enter the password required to connect to your wireless router and then tap [Next]. R The hub and your mobile device connect to your wireless router. [. . . ] 220 g Open source software notice R Parts of this product use open source software supplied based on the relevant conditions of the Free Software Foundation’s GPL and/or LGPL and other conditions. Please read all licence information and copyright notices related to the open source software used by this product. This information is available at the following web page: www. panasonic. net/pcc/support/tel/ homenetwork/ At least three (3) years from delivery of this product, Panasonic Corporation will give to any third party who contacts us at the contact information provided below, for a charge of no more than the cost of physically distributing source code, a complete machine-readable copy of the corresponding source code and the copyright notices covered under the GPL and the LGPL. Please note that software licenced under the GPL and the LGPL is not under warranty. [. . . ]