User manual PANASONIC KX-HN6004SK

[. . . ] This document explains how to configure the hub and access it using a mobile device. These steps must be followed before you can use the system. For details about how to use the system, refer to the User’s Guide (page 17). Please read this document before using the unit and save it for future reference. [. . . ] € If the LED indicator is lit in yellow, repeat the initial setup procedure from the beginning. € If the LED indicator is blinking quickly in green, you must reset the hub’s Wi-Fi settings. See “If the hub's LED indicator blinks in green”, page 13. When prompted, press MWi-Fi SETUPN on the hub. r Your mobile device will be registered to the hub. When prompted, follow the on-screen instructions and set the password used to log in to the hub while away from home and then tap [OK]. When prompted, enter a name for the hub and your mobile device and then tap [OK]. R The hub name setting is used by your mobile device to identify the hub. This is useful when you have multiple hubs. For assistance, please visit http://shop. Com/support R The mobile device name setting is used by the hub and other system users to identify your mobile device. This is useful when performing certain operations, such as deregistering or making intercom calls using a cordless handset. When prompted, select whether you want to customize device profiles, i. , the device name, location, and other settings for your devices. R If you choose not to customize the device profiles now, you can change them later if desired. For details about customizing device profiles, refer to the User’s Guide (page 17). R If you choose to customize the device profiles now, change each setting as desired. When finished, tap repeatedly until the “completed” message is displayed. R The app’s home screen is displayed when initial setup is complete. If the hub's LED indicator blinks in green If you enter the wrong Wi-Fi password during the initial setup procedure for iPhone or iPad, [Setup failed. ] is displayed and the hub’s LED indicator blinks quickly in green. Press and hold the 3 registration buttons on the side of the hub and MWi-Fi SETUPN on the back of the hub at the same time (4 buttons total) until the hub’s LED indicator blinks slowly in green and yellow. [. . . ] For the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 For assistance, please visit http://shop. ) Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Home Network System Products microSD card (Included model only) Parts One (1) Year 90 days Labor One (1) Year N/A During the “Labor” warranty period there will be no charge for labor. [. . . ]