User manual PANASONIC KX-HNB600FX

[. . . ] System Setup Guide Home Network System Hub Model No. KX-HNB600FX Thank you for purchasing a Panasonic product. This document explains how to configure the hub and access it using a mobile device. These steps must be followed before you can use the system. For details about how to use the system, refer to the User’s Guide (page 16). [. . . ] Connect the AC adaptor to the power outlet. Insert the telephone line cord into the LINE jack and a telephone line jack until you hear a click. *1 DSL/ADSL service users only: Connect your DSL/ADSL filter (not supplied). *1 Outdoor Camera (KX-HNC600) or Indoor Camera (KX-HNC200) users only: Remove the label covering the card slot and then insert the microSD card (not supplied) into the slot with the notched corner (1) facing upwards (2) until it clicks into place. This step is only necessary if you want to use the landline phone features. For details about the landline phone features, refer to the User’s Guide (page 16). 3 4 1 5 2 *1 6 Note: R Use only the supplied Panasonic AC adaptor PNLV236CE. R A microSD card (not supplied) is required to record images from cameras. Refer to the information about the available microSD card (page 3). R To remove the microSD card, push in the microSD card and then remove it. 2 1 Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use. ) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. 11 Setup Power failure R The hub will not work during a power failure. R The hub’s telephone features will not work during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. Compatible mobile devices iPhone 4 or later, iPad, or iPad mini (iOS 6. 0 or later) or an Android™ device (Android 4. 0 or later) Note: R The [Home Network] app may not function properly depending on the system environment, such as the model of your mobile device, peripherals connected to your mobile device, and the apps installed on your mobile device. R The following Android devices are not compatible with the [Home Network] app. – Android devices that are not supported by Google Play – Android devices with limited hardware features (Bluetooth, Wi-Fi, and microphone support are required. ) Wi-Fi® settings After you have connected your hub, here is what you will need to do in order to access the system from your mobile device. Each procedure is explained in this chapter. 1 2 Download Download the [Home Network] app to your mobile device. Initial setup Use the [Home Network] app to configure the hub to connect to your wireless router, and then register your mobile device to the hub. Initial setup Confirm the following before you begin. – Make sure you have installed the [Home Network] app on your mobile device – Make sure the hub and your wireless router are turned on and the hub’s LED indicator is lit in yellow – Make sure the hub is located within range of your wireless router – Make sure your mobile device is connected to your wireless router – Make sure your mobile device can connect to the Internet – Make sure you know the network name (SSID) and password assigned to your wireless router Note: R If the hub’s region setting is not set, the hub prompts you to set it. Follow the on-screen instructions to set up the hub. Downloading the [Home Network] app Download information is available at the web page listed below. www. panasonic. net/pcc/support/tel/ homenetwork/ Initial setup for iPhone, iPad 1 Start the [Home Network] app. R If prompted, follow the on-screen instructions and select the appropriate region/country. R If prompted to select the device to be set up, tap [Hub]. 12 Setup 2 3 4 When prompted, tap [Set up the Hub]. When prompted, press MWi-Fi SETUPN on the hub. Change your mobile device’s Wi-Fi setting temporarily so that it connects to the hub directly. R Open your mobile device’s [Settings] app, tap [Wi-Fi], select “KX-HNB600_Panasonic”, enter “00000000” as the password, and then tap [Join]. [. . . ] Wireless communication may be unreliable when the following obstacles are located between the hub and other system devices. R Metal doors or screens R Walls containing aluminium-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings Accessing the User’s Guide The User’s Guide is a collection of online documentation that helps you get the most out of the [Home Network] app. 1 iPhone/iPad Tap in the app’s home screen. Android devices Tap or press your mobile device’s menu button in the app’s home screen. Tap [User’s Guide]. 2 Note: R Microsoft® Windows® Internet Explorer® 8 and earlier versions are not supported. [. . . ]