User manual PANASONIC KXHNC200E

[. . . ] Installation Guide Home Network System Indoor Camera Model No. KX-HNC200E Thank you for purchasing a Panasonic product. This document explains how to install the indoor camera properly. For details about how to use the system, refer to the User’s Guide (page 14). Please read this document before using the unit and save it for future reference. [. . . ] For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Protecting your recordings R Do not remove the microSD card or disconnect the hub’s AC adaptor while reading or writing data to the microSD card. Data on the card could become corrupted. R If a microSD card malfunctions or is exposed to electromagnetic waves or static electricity, data on the card could become corrupted or erased. Therefore we recommend backing up important data to a computer or other device. Disposal of Old Equipment (Only for European Union and countries with recycling systems) Helpline Tel. R When registration is complete, the hub sounds one long beep. Note: R To cancel without registering the camera, press M N on the hub and on the camera again. R If registration fails, the hub sounds several short beeps. 1 2 1 Vertical detection range: approx. 50° 2 Distance of detectable motion: approx. 5 m Note: R Movement may be incorrectly detected when the moving object and the background have similar colours. R Movement may be incorrectly detected when there are sudden changes to the overall brightness level, such as when lights are turned on. R Detection becomes difficult when the image is dark. R You can adjust the area detectable by the visual sensor. For more information, refer to the User’s Guide (page 14). Using the app When you register the camera by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 14). Information about sensor features The camera has 3 sensor features: a visual sensor used for motion detection, a temperature sensor, and a sound sensor. Please read the following information about each sensor before deciding where to install the camera. Note: R The camera’s sensor features are not designed to be used in situations that require high reliability. We do not recommend use of the sensor features in these situations. R Panasonic takes no responsibility for any injury or damage caused by the use of the camera’s sensor features. Helpline Tel. 0330 3331112 Ireland 01 4475228 9 HNC200E_(en_en)_0421_ver. 060. pdf 9 2015/04/21 13:28:16 Setup Direction of motion It is easier to detect objects that move sideways in front of the camera, and more difficult to detect objects that move directly toward the front of the camera. Sound sensor The sensor is triggered when the set sound level is exceeded. [. . . ] 160 g *1 The IR-LED will be lighted at the low illuminance conditions. 1 iPhone/iPad in the app’s home screen. Tap Android™ devices Tap or press your mobile device’s menu button in the app’s home screen. Tap [User’s Guide]. 2 Note: R Microsoft® Windows® Internet Explorer® 8 and earlier versions are not supported. R Android 4. 1 or later versions are recommended. [. . . ]