User manual PANASONIC KX-HNC210

[. . . ] 12 Features available when using the [Home Network] app . A A Accessory item/Part number AC adaptor/PNLV2360Z Quantity 1 Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Confirm the usage area Read the information in this document to confirm that the desired usage area is suitable to proper operation. Connection Place the camera in the desired location and connect it to the power outlet. 2 3 4 LED indicator You can use the LED indicator to confirm the camera’s status. Indicator Off Status No power, or LED indicator is turned off*1 Normal operation*1 Registration mode Motion detected Live images are being viewed or recorded Registering the camera This procedure is not required for devices that were included as part of a bundle. Before you can use the camera, it must be registered to the hub. If the camera is not registered to a hub, the camera’s LED indicator blinks slowly in amber. You can register each device by using the registration buttons or the [Home Network] app. Green, lit Green, blinking slowly Red Red, blinking slowly For assistance, please visit http://shop. Pdf 7 2015/10/06 13:23:03 Setup Note: R Before registering the camera, make sure the AC adaptors of the hub and camera are connected and each device is powered. Using visible light to detect motion The camera can detect motion by recognizing changes in the brightness of areas that are visible to the camera. Using registration buttons 1 2 Hub: CAMERAN until the Press and hold M LED indicator blinks slowly in green. For more information, refer to the User’s Guide (page 13). A B C Information about night vision mode The camera features an array of infrared LEDs that light automatically in low-light conditions, allowing camera images to be viewable even when the surrounding area is dark. Note: R When night vision mode is active, the colors in camera images may appear different from normal. R When night vision mode is active, the array of infrared LEDs that surround the camera’s lens light up in a faint red color that can be seen in the dark. R If the camera is installed in front of a window and points directly at the window, images may be poor when night vision mode is active. D E It is difficult to detect movement directly towards the front of the camera. It is easy to detect movement sideways in front of the camera. Note: R The temperature sensor may not detect temperature accurately if the camera is exposed to warm or cool breezes from heating/cooling systems. R You can adjust the temperature setting of the temperature sensor. For more information, refer to the User’s Guide (page 13). Confirming the usage area Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1, 000 feet) outdoors. [. . . ] Notice: R FCC ID can be found on the rear of the unit. For all your Panasonic gear Go to http://shop. Com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, BaƩeries, Backup Chargers & more… Customer Services Directory For Product InformaƟon, OperaƟng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to http://shop. For the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 For assistance, please visit http://shop. [. . . ]