User manual PANASONIC KX-HNC800E

[. . . ] Installation Guide Home Network System Full HD Camera Model No. KX-HNC800E Thank you for purchasing a Panasonic product. This document explains how to configure the camera and access it using a mobile device. These steps must be followed before you can use the camera. For details about how to use the camera, refer to the User’s Guide (page 33). [. . . ] Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause the adaptor to become disconnected. Helpline Tel. 0330 3331112 Ireland 01 4475228 17 HNC800E_(en_en)_0222_ver. 101. pdf 17 2017/02/22 13:28:38 Setup Power failure R The camera will not work during a power failure. 18 Helpline Tel. 0330 3331112 Ireland 01 4475228 HNC800E_(en_en)_0222_ver. 101. pdf 18 2017/02/22 13:28:39 Setup Setup overview After you have connected your camera, here is what you will need to do in order to access it from your mobile device. Each procedure is explained in this chapter. Using the camera by itself (no integration with a Home Network System) Integrating the camera with a Home Network System (registering to a KX-HNB600 hub) 1 Download (page 20) Download the [Home Network] app to your mobile device. 1 Download (page 20) Download the [Home Network] app to your mobile device. 2 Set up the camera (page 21) Use the [Home Network] app to configure the camera to connect to your wireless router, and then register your mobile device to the camera. 2 Set up the hub Refer to the System Setup Guide included with your hub. 3 Register camera to hub (page 26) Use the [Home Network] app to register the camera and configure it to connect to your wireless router. 3 (Optional) Register additional mobile devices (page 25) You can register additional mobile devices to the camera, for a total of 8. Helpline Tel. 0330 3331112 Ireland 01 4475228 19 HNC800E_(en_en)_0222_ver. 101. pdf 19 2017/02/22 13:28:39 Setup Downloading the [Home Network] app Download information is available at the web page listed below. www. panasonic. net/pcc/support/ tel/homenetwork/ such as the model of your mobile device, peripherals connected to your mobile device, and the apps installed on your mobile device. R The following Android devices are not compatible with the [Home Network] app. – Android devices that are not supported by Google Play™ – Android devices with limited hardware features (Bluetooth, Wi-Fi®, and microphone support are required. ) Using your device’s app store iPhone, iPad users Search for “Panasonic Home Network System”. iPad users should search in the “iPhone only” category. Android™ device users Search for “Panasonic Home Network System”. Compatible mobile devices – iPhone 4 and later, iPad (iOS 6. 0 and later) – Android smartphones and tablets (Android 4. 0 and later) Note: R The [Home Network] app may not function properly depending on the operating environment, 20 Helpline Tel. 0330 3331112 Ireland 01 4475228 HNC800E_(en_en)_0222_ver. 101. pdf 20 2017/02/22 13:28:39 Setup Setting up the camera (initial setup) Confirm the following before you begin. – Make sure you have installed the [Home Network] app on your mobile device – Make sure the camera is located within range of your wireless router – Make sure your mobile device is connected to your wireless router – Make sure your mobile device can connect to the Internet – Make sure you know the network name (SSID) and password assigned to your wireless router Initial setup (for iPhone, iPad users) R Do not perform this procedure if you want to integrate the camera with your Home Network System. R If your mobile device is already registered to a hub and you want to use your camera by itself, see “Information for current hub users”, page 24. 1 Plug in the camera and wait about 1 minute for the camera’s LED to light in green. R If the LED does not light in green, or if you experience trouble during this procedure, reset the camera (page 27) and then repeat this procedure. 2 Start the [Home Network] app. R If prompted, follow the on-screen instructions and select the appropriate region/country. 3 Tap [HD Camera]. 5 When prompted, press the MSETUPN button on the back Helpline Tel. 0330 3331112 Ireland 01 4475228 21 HNC800E_(en_en)_0222_ver. 101. pdf 21 2017/02/22 13:28:39 Setup of the camera, and then tap [Next]. the app again, and then tap [Add This Mobile Device]. R If you enter the wrong password, an error is displayed. Repeat the initial setup procedure from the beginning. [. . . ] – If the wireless router detects radar waves while communicating, the wireless router changes the channel automatically and communication may be interrupted. Open source software notice R Parts of this product use open source software supplied based on the relevant conditions of the Free Software Foundation’s GPL and/or LGPL and other conditions. Please read all licence information and copyright notices related to the open source software used by this product. This information is available at the following web page: www. panasonic. net/pcc/ support/tel/homenetwork/ At least three (3) years from delivery of this product, Panasonic Corporation will give to any third party who contacts us at the contact information provided below, for a charge of no more than the cost of physically distributing source code, a complete machine-readable copy of the corresponding source code and the copyright notices covered under the GPL and the LGPL. Please note that software licensed under the GPL and the LGPL is not under warranty. [. . . ]