User manual PANASONIC KXHNK101

[. . . ] This document explains how to operate the access keypad properly. For details about how to use the system, refer to the User’s Guide (page 15). Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our Web site: http://shop. [. . . ] Note: R Before registering the keypad, make sure the AC adaptors of the hub and keypad are connected and each device is powered. Setup overview 1 Initial setup Make sure you can access the system using your mobile device. For details, refer to the System Setup Guide included with your hub. Registration Required only if the keypad was purchased separately (i. Confirm the installation area Read the information in this document to confirm that the desired installation area is suitable to proper operation. Installation Install the keypad in the desired location. Using registration buttons 1 Hub: 2 2 3 OTHER Press and hold M DEVICEN until the LED indicator blinks slowly in green. Keypad: Press and hold M N until the LED indicator starts blinking slowly in green and the touchpanel buttons start blinking slowly. R When registration is complete, the hub sounds one long beep. 4 8 Note: R To cancel without registering the keypad, press M N on the hub and on the keypad again. R If registration fails, the hub sounds several short beeps. For assistance, please visit http://shop. Pdf 8 2015/06/18 20:12:05 Setup Using the app When you register the keypad by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 15). Usage area cautions Using the keypad in the following areas may cause deformation, malfunction, or operational failure. R In direct sunlight R Areas exposed to grease or steam, such as kitchens R Near fire or heating devices R Near magnetic fields (such as near microwaves and magnets) R Areas subject to extreme temperature changes, such as next to air conditioners R Areas with reflective objects, such as glass, that can interfere with detection of temperature variation R Areas where the temperature is affected by strong illuminating objects (such as fluorescent lights) R Near devices that emit strong radio waves, such as mobile phones Confirming the usage area Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1, 000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings Note: R The keypad’s LED indicator blinks in red if it is out of range of the hub. In this case, confirm all connections, including those of the hub. For assistance, please visit http://shop. Pdf 9 2015/06/18 20:12:05 Setup Installation To mount the keypad flat against the wall, use the mounting bracket. Note: R Mount the keypad on the stable location where the keypad can be adequately supported when mounting. [. . . ] The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Home Network System Products microSD card (Included model only) Parts One (1) Year 90 days Labor One (1) Year N/A During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). [. . . ]