User manual PANASONIC KX-HNK102EX

[. . . ] For dedicated help, support, or advice, available to help you Monday Friday, 09:00 - 23:00. For U. K. , please contact us on 0330 3331112 and for Ireland 01 4475228. Table of Contents Important Information Accessory information . . . . . . . . . . . . . . . 3 General information . . . . . . . . . . . . . . . . . . . 4 About this system . . . . . . . . . . . . . . . . . . . . . . 5 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Important safety instructions . . . . . . 6 For best performance . . . . . . . . . . . . . . . . 6 Other information . . . . . . . . . . . . . . . . . . . . . . . 7 Setup Part names and functions . . . . . . . . . . 9 LED indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup overview . . . . . . . . . . . . . . . . . . . . . . . . 10 Inserting the battery . . . . . . . . . . . . . . . . . 11 Attaching the key ring . . . . . . . . . . . . . . 11 Registering the remote . . . . . . . . . . . . 12 Wireless communication range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Appendix Using the remote . . . . . . . . . . . . . . . . . . . . . 13 Features available when using the [Home Network] app . . . . . . . . . . . . . . . . 13 Accessing the User’s Guide . . . . 13 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Conditions of guarantee . . . . . . . . . . 15 2 Important Information Accessory information Supplied accessories No. A B *1 A Accessory item/Part number Battery*1 Key ring/PNGX1035Z Quantity 1 1 When replacing the battery, refer to the battery specifications noted under “Power source” on page 14. B Other information R Design and specifications are subject to change without notice. [. . . ] There is a risk of leakage, overheating, and rupture. Do not attempt to use a battery if it is leaking. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. Do not intentionally pour water on the battery or allow it to get wet. If the battery becomes wet, remove it immediately and contact an authorised service centre. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. Use only the batteries indicated in this document. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Hub location/avoiding noise The hub and other compatible Panasonic devices use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your hub: – at a convenient, high, and central location with no obstructions between the product and hub in an indoor environment. Note for the battery symbol This symbol (B) might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Helpline Tel. 0330 3331112 Ireland 01 4475228 7 Important Information Note for the battery removal procedure Refer to “Inserting the battery” on page 11. 8 Helpline Tel. 0330 3331112 Ireland 01 4475228 Setup LED indicator Part names and functions n Front view (Arm: Away) button Arms the alarm system using the [Arm: Away] mode. (disarm) button Disarms the alarm system. (smart) button Used to turn on a smart plug, trigger the alarm system, etc. Battery cover lock Battery cover M N Used to register the keychain remote to the hub. Key ring eyelet Key ring A B C D LED indicator You can use the LED indicator to confirm the remote’s status. n Rear view Indicator Off Amber, blinking quickly Red, lit G Status Normal operation or no power*1 Signal is being sent to the hub (you are pressing a button)*2 [Arm: Away] mode selected (you pressed the arm button)*2 [Disarm] mode selected (you pressed the disarm button), or you pressed the smart button*2 E F Green, lit H I Helpline Tel. 0330 3331112 Ireland 01 4475228 9 Setup Indicator Red, blinking Status Remote is out of range of the hub, or could not communicate with the hub Registration mode (you pressed and held M N) Low battery 4 Confirm the usage area Read the information in this document to confirm that the desired usage area is suitable to proper operation. Green, blinking slowly Repeating pattern of blinking green and blinking red *1 *2 The LED lights for about 2 seconds after a button is pressed, then turns off. If the LED indicator does not light when you press a button, the battery must be replaced. [. . . ] You can register each device by using the registration buttons or the [Home Network] app. Note: R To cancel without registering the remote, press M N on the hub and on the remote again. R If registration fails, the hub sounds several short beeps. Using the app When you register the remote by using the [Home Network] app, you can assign a name to your devices. For more information, refer to the User’s Guide (page 13). Using registration buttons 1 Hub: Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m indoors and approximately 300 m outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. [. . . ]