User manual PANASONIC KXHNS102

[. . . ] This document explains how to install the motion sensor properly. For details about how to use the system, refer to the User’s Guide (page 14). Please read this document before using the unit and save it for future reference. For assistance, visit our Web site: www. [. . . ] R When registration is complete, the hub sounds one long beep. Using heat to detect motion The motion sensor’s infrared sensor can detect motion by recognizing temperature differences that occur within the range of the sensor. It does this by detecting the infrared rays that are emitted naturally by people, animals, etc. , which correlate to the object’s temperature. The detection range is indicated in the illustration by the gray area in front of the motion sensor. Detection range when looking from above Note: R To cancel the registration, press N on the hub and on the motion M sensor. R If registration fails, the hub sounds several short beeps. Using the app When you register the motion sensor by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 14). Please read the following information before deciding where to install the motion sensor. Note: R The motion sensor’s sensor features are not designed to be used in situations that require high reliability. Com/support 9 Setup Detection range when looking from the side move directly toward the front of the motion sensor. A 2 1 B C D It is difficult to detect movement directly towards the front of the motion sensor. It is easy to detect movement sideways in front of the motion sensor. 4 feet) Note: R Detection becomes difficult when there is little difference between the temperatures of objects and the surrounding environment, such as during summer. Conversely, detection becomes easier when there is a large difference between the temperatures of objects and the surrounding environment, such as during winter or at night. R Detection does not occur when there are obstacles in front of the infrared sensor. Remove the obstacles or change the installation location. Direction of motion It is easier to detect objects that move sideways in front of the motion sensor, and more difficult to detect objects that 10 For assistance, please visit www. Com/support Setup Confirming the usage area Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1, 000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings Note: R You can check the motion sensor’s communication status by pressing M N. [. . . ] This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service--Online Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www. Com/repair When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. [. . . ]