User manual PANASONIC KX-HNS103FX

[. . . ] Installation Guide Home Network System Water Leak Sensor Model No. KX-HNS103FX Thank you for purchasing a Panasonic product. This document explains how to install the water leak sensor properly. For details about how to use the system, refer to the User’s Guide (page 19). Please read this document before using the unit and save it for future reference. Table of Contents Introduction Accessory information . . . . . . . . . . . . . . . 3 Important Information About this system . . . . . . . . . . . . . . . . . . . . . . 4 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important safety instructions . . . . . . 5 For best performance . . . . . . . . . . . . . . . . 5 Other information . . . . . . . . . . . . . . . . . . . . . . . 6 Setup Part names and functions . . . . . . . . . . 8 LED indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Setup overview . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Inserting the battery . . . . . . . . . . . . . . . . . . . 9 Registering the sensor . . . . . . . . . . . . . . . 9 Confirming the usage area . . . . . . 10 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Appendix Testing the sensor . . . . . . . . . . . . . . . . . . . 19 Features available when using the [Home Network] app . . . . . . . . . . . . . . . . 19 Accessing the User’s Guide . . . . 19 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2 Introduction Accessory information Supplied accessories No. [. . . ] R Do not place heavy objects on top of the product. R The product should be kept away from heat sources such as radiators, cookers, etc. It should not be placed in rooms where the temperature is less than 0 °C or greater than 40 °C. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. R Do not allow the probe unit’s metal probes to make contact with metal objects. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. R If the probe unit’s metal probes come into contact with a foreign material (oil, detergent, etc. ), the probes may repel water and therefore will not be able to properly detect a water leak. Periodically check the metal probes and wipe away any water or foreign material that has become adhered to the probes. R If the probes come into contact with water, wipe the probe unit dry. Do not allow the probes to remain in contact with water for an extended period of time, as the probes may begin to turn black. (This will not affect the product’s ability to detect a water leak. ) Disposal of Old Equipment and Batteries (Only for European Union and countries with recycling systems) 1 2 Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. These symbols (A, B) on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used 6 Important Information batteries, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union These symbols (A, B) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol This symbol (B) might be used in combination with a chemical symbol. [. . . ] 3 Double-sided tape 3 3 3 15 Setup Securing with double-sided tape only Note: R Make sure any surfaces that will make contact with the double-sided tape are clean and dry before applying the tape. When attaching the double-sided tape to concrete or bricks, if the surface of the concrete or bricks is wet, make sure to completely dry the surface before attaching the double-sided tape. 1 Remove the backing from the double-sided tape, attach the main unit and the probe unit to the installation surface, and then press firmly on each unit to ensure solid adhesion to the installation surface. 1 Double-sided tape 1 1 1 Note: R To install the probe unit on a floor, see page 17. 16 Setup Installing the probe unit on a floor When installing the probe unit on a floor, use the double-sided tape to attach the probe unit directly to the floor. Note: R If the probe unit is inserted into the wall mounting adaptor and attached to a floor, the probes will be too far from the floor and therefore water leaks can only be detected after the leaked water has become deep enough to touch the probes. [. . . ]