User manual PANASONIC KX-MB2061

[. . . ] Operating Instructions Multi-Function Printer Model No. KX-MB2061FX Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup of Multi-Function Station (CD-ROM). 1 2 Charge the battery for about 7 hours before initial use. R This unit is compatible with Caller ID. Subscription to the appropriate service through your service provider/telephone company is required. Thank you for purchasing a Panasonic product. R Cordless handset: The display will be in the selected language. [. . . ] A AM N Note: R You can also program this feature with the base unit (feature #211 on page 79). To change the maximum recording time for incoming messages You can change the maximum message recording time allotted to each caller. You can also select “Greeting Only” which sets the unit to greet callers but not record messages. The default setting is “3 Minutes”. A AM N Note: R When you select “Greeting Only”: – If you do not record your own message, the unit will play the pre-recorded greeting-only message asking callers to call again later. – If you use your own message, record the greeting-only message asking callers to call again later (page 73). R You can also program this feature with the base unit (feature #305 on page 86). 75 10. Programmable Features 10. 1 Base unit programming MSetN 10. Programmable Features MMenuN 1 MMenuN 2 Press MBN and the 3-digit code (page 77 to page 94). 3 Press the appropriate selection to display the desired setting. R This step will vary depending on the feature. 4 MSetN 5 Press MMenuN to exit. To select features through the web browser interface (LAN connection only) You can change features through the web browser interface instead of the base unit. A [Utilities] A [Configuration Web Page] R You can also access the unit by entering its IP address on the web browser. Select the desired category from the menu bar. [Device Configuration]: features of the unit [Network Configuration]: network features 3. Type “root” as the user name, then enter the password (feature #155 on page 77). Select the desired feature tab at the top of the right frame. Change the settings or edit the information. R This step will vary depending on the feature. [Submit] R The new setting will be transferred to the unit. Note: R The settings displayed in the web browser will be updated by clicking [Reload]. 76 10. Programmable Features 10. 1. 1 Basic features Feature/Code Setting the date and time*1 MBNM1NM0NM1N Setting your logo MBNM1NM0NM2N Setting your fax number MBNM1NM0NM3N Setting the dialling mode (for the base unit and cordless handset) MBNM1NM2NM0N Setting recall/flash time (for the base unit and cordless handset) MBNM1NM2NM1N Selection Enter the date and time using the dial keypad. Enter your fax number using the dial keypad. M1N “PULSE” M2N “TONE” (default) See page 24 for details. [. . . ] IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft. com). This product includes software written by Tim * Hudson (tjh@cryptsoft. com). * */ Original SSLeay License ----------------------/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft. com) * All rights reserved. [. . . ]