User manual PANASONIC KX-P1081

[. . . ] 3) This part explains how to use the Digital Duplicator Utility, which lets you adjust the appearance of your document before duplicating. For example, you can enlarge or reduce the size of the image, change the color, or select an area. This utility also provides a variety of duplicating functions. s Part 2 Scanner Function ( P. 74) This part explains how to use the scanner driver, which lets you adjust the appearance of your document before scanning. [. . . ] To display the Gamma Correction window, perform the following steps. 1 Click on the Gamma Correction check box in the Adjust tab. The Gamma button appears. Check box 2 Click the Gamma button ( ). The Gamma Correction window appears. # $ % & ' 104 ( ) Adjusting Colors Intensity # Gamma curve customize check box Clicking off this check box allows you to adjust the colors by using the parameter scroll bar. Clicking on this check box allows you to adjust the gamma curve of the selected color manually. $ Parameter Adjusts all the colors using the parameter slider . The current parameter value appears in the box. The parameter can be entered by typing the value in the box. Setting a higher value provides stronger highlight. % Gamma Table Selects a color or all colors for adjustment. This selection is effective only when the Gamma curve customize check box is clicked on. & Gamma diagram s When the Gamma curve customize check box is clicked off Displays the gamma curve according to the current parameter value. s When the Gamma curve customize check box is clicked on Adjusts a gamma curve of the selected color by dragging three control points ( P. 107). ' Apply button Makes a setting effective and shows the result of the adjustment in the Preview Screen. ( Close button Closes the Gamma Correction window. Note: BIf the Apply button is not clicked before clicking the Close button, the changes made in the Gamma Correction window will not become effective. ) Help button Displays the help information on this window. 105 Adjusting Colors Intensity Color Adjustment You can adjust the intensity of color(s) by using the Parameter scroll bar or the Gamma Curve control points. s Using the Parameter Scroll Bar 1 Click off the Gamma curve customize check box. Check box Parameter scroll bar Parameter box 2 Set the parameter value by dragging the slider left or right in the Parameter scroll bar, or by typing the numerical value in the parameter box then pressing the return key. The current parameter value appears in the box next to the parameter scroll bar, and the gamma curve is modified according to the value. 3 Click Apply to see the result of the setting in the Preview Screen. BTo cancel the setting, click Restore Default in the Adjust tab. BTo scan the adjusted image, click Scan in the Panasonic Scanner Driver window. 106 Adjusting Color Intensity s Using Gamma Curve Control Points 1 Click on the Gamma curve customize check box. A gamma curve with three control points appears in the gamma diagram. Light tone Middle tone Dark tone Gamma diagram 2 Click G of the Gamma Table, and select the color to be adjusted. RGB ALL: Red, Green and Blue colors can be adjusted at once. Red, Green, Blue: Each color can be adjusted individually. This selection is not effective when the multi-purpose tray (MPT Plain Paper, MPT Transparency, etc. ) is selected in the Paper source ( P. When the multi-purpose tray is selected, Face up is selected automatically. 113 KX-P1081 Window Overview for Windows 95/3. 1 & Paper source Selects media by choosing the location (trays) or the type of media. BAuto [Plain Paper]: Prints on paper loaded in a paper tray. The printer picks paper from the paper tray that is loaded with the media size you selected in the application software. When the tray is empty, the printer automatically picks from another paper tray of the same media size in the order of Upper, Middle and Lower. BAuto [Transparency]: Prints on transparency loaded in a transparency tray. The printer picks transparency from the transparency tray that is loaded with the media size you selected in the application software. When the tray is empty, the printer automatically picks from another transparency tray of the same media size in the order of Upper, Middle and Lower. BUpper : Prints on media loaded in the standard tray. BMiddleS1 : Prints on media loaded in the upper tray (optional feeder). BLowerS1 : Prints on media loaded in the lower tray (optional feeder). [. . . ] . 9 Black & White 2colors, image type . . 78, 82-84, 94 Black & White Halftone, image type . . 78, 82, 94 Black & White Photo, image type . . 47 Digital Duplicator Utility setting . [. . . ]