User manual PANASONIC KX-P1180

[. . . ] 7 Setting your logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Character input and command key table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Voice guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Automatic dialing on the main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Replacement ink film: KX-FAN190 (15 m) KX-FAN190W (15 m X 2) KX-FAN191 (15 m) (*1) KX-FAN191W (15 m X 2) (*1) 4 714 1, 208 893 1, 523 *1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film than does the KX-FAN190/190W. Tax included. Installations and connections Installing recording paper (A4 size) 1 Open the recording paper tray. 2 Set up the recording paper stands. Pull out the front stand first. 3 Insert the recording paper into the Recording paper Printing side is on the back. recording paper tray. (Up to 15 sheets) Fan the stack of recording paper. Folding the recording paper tray 1 Remove the recording paper and fold the recording paper stands in. 2 Close the recording paper tray. 5 Installations and connections Connecting the main unit 1 Raise the antenna. 2 Connect the cord and place the handset on the main unit. Setting up the portable handset (KX-FKN526) 1 Press on the battery cover and slide the cover. 2 Insert the battery into the compartment and close the battery cover. Telephone line cord (supplied accessory) Wall jack 3 Connect the telephone line cord. Power cord Battery Power outlet (AC 100 V) 4 Connect the power cord. After the Power On. . . 3 Connect the charger to the power outlet, then place the portable handset on the charger for about 10 hours. Power outlet (AC 100 V) 1 This unit will automatically select the dialing mode (Pulse/Tone). 2 When the following is displayed, press (Stop). If you cannot make a call. . . Set the dialing mode with the main unit. Press (Search button) repeatedly until the desired setting is selected. Example : l Charger : Tone : Pulse (20 PPS) : Pulse (10 PPS) : Auto (Default) l After your Panasonic battery is fully charged, it will last up to about 5 hours of conversation. 4. (Stop). Setting the date and time Setting your facsimile telephone number 1 Press 2 Press 3 Press (Function/Resolution). 1 Press 2 Press 3 Press (Function/Resolution). . . (Set). 11 Automatic dialing on the main unit Storing telephone numbers in the one-touch dialers You can store a telephone number in each one-touch dialer. Making a voice call using the one-touch dialer 1 Lift the handset. 1 Press 2 Press the one-touch dialer ( (Function/Resolution). or ). 2 Press the one-touch dialer ( Example: one-touch dialer 1 or ). Erasing a stored number in the one-touch dialer One-touch dialer number 3 Enter the telephone number, up to 24 digits. l l To correct a mistake, press The (Flash/Erase). (Hold/Call memory) button replaces the digit with a space. 1 Press (Function/Resolution). 4 Press (Set). 2 Press the one-touch dialer ( 3 Press 4 Press (Flash/Erase). or ). (Set). 12 Automatic dialing on the portable handset (KX-FKN526) Storing names and telephone numbers in the phonebook Making a voice call using the phonebook 1 Press 2 Press (Phonebook). 1 Press 2 Press 3 Press (Phonebook). (Search button) repeatedly until the desired name is displayed. l "XXX" shows the remaining station numbers you can store. l You can program up to 150 stations, including 4 pre-programmed stations. Editing a stored name or number in the phonebook 3 Enter the name, up to 12 characters (see the table on page 9 for instructions). 1 Press 2 Press (Phonebook). (Search button) repeatedly until the desired name is displayed. 4 Press l . 5 Enter the telephone number, up to 24 digits. To correct a mistake, press . 4 Edit the name (see the table on page 9 for l instructions). If you do not need to edit the name, skip to step 5. 6 Press 8 Press 7 Enter the group number ( 5 Press . 6 Enter the correct telephone number. l to ). If you do not need to edit the telephone number, skip to step 7. . l To program other items, repeat steps 3 to 8. 9 Press 7 Press . 8 Edit the group number. l (Off) to exit the program. If you do not need to edit the group number, skip to step 9. 13 9 Press 10 Press Intercom An intercom is available between the portable handsets or between the main unit and portable handset(s). [. . . ] The message is announced in Japanese and means "We're sorry, but your call cannot be connected. ". 1 While the unit is ringing, press OR press . While you are on an incoming call, press " " is displayed. . , then (Search button) repeatedly until the To block a call using chimes 1 While you are on an incoming call, press 2 Press . l (Block). 2 Press l Chimes are heard by the caller. 3 Tell the caller that a visitor has come and hang up. For Number Display service subscribers If you subscribe to Number Display service, the message heard by the caller will change according to the caller's situation. Example : If the caller requested not to send caller's information, the message heard by the caller will change to mean "Your phone number is blocked by service provider. Please call again with adding `186' to the beginning of the phone number. ". [. . . ]