User manual PANASONIC KX-P3200

[. . . ] DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission. This telephone was designed for a wide range of applications. For your future reference Date of purchase Serial number (found on the rear of the unit) Dealer's name and address Dealer's telephone number Attach your sales receipt here. Caution: L Note that the images of copied or received documents will remain on the used ink film. Use discretion when disposing of the used ink film. L Do not rub or use an eraser on the printed side of recording paper, as the print may smear. [. . . ] L If there is no memory available to record voice messages, "Full" will be displayed. Erase unnecessary messages (page 56, 58). Note: L Voice memos are treated as new messages. To listen to memo messages, see page 56, 58. L If there is no memory available to record voice messages, "Full" will be displayed. Erase unnecessary messages (page 56, 58). 8. 4. 4 Operation using the direct commands You can operate the answering machine by pressing dial keys as direct commands. To use the following commands, press $ (centre of joystick), select K, then press , . Key {1} {2} {3} {4} {5} Direct commands Repeats a message (during playback)*1 Skips message (during playback) Enters the "Setting TAM" menu (page 59) Plays new messages Plays all messages Plays greeting message Records memo message Records greeting message Turns auto answer setting ON*2 Stops the operation (recording, playback) To repeat a message Push the joystick left while listening to the message. L If you push the joystick left within 5 seconds of the beginning of the message, the previous message will be played. To skip a message Push the joystick right to play the next message. Press _ (soft key) while listening to the message you want to erase. Select K, then press , . {6} {7}{4} {7}{6} {8} {9} 58 8. Select "Setting TAM", then press , . Select "Greet Monitor", then press , . Select "On" or "Off", then press , . Press {ih}. 8. 4. 5 Programming for answering machine To set the remote operation ID A 3-digit remote operation ID must be entered when operating the answering system remotely (page 61). This ID prevents unauthorised parties from listening to your messages remotely. After you store your remote operation ID, remote operation is possible. Select "Setting TAM", then press , . Select "Remote Code", then press , . To activate the remote operation feature, enter a 3-digit remote operation ID. L To deactivate the remote operation feature, press {*}. Answering Machine Note: L You can also program this feature with the base unit (feature #67 on page 67). 60 8. [. . . ] 1 Test Chart in standard resolution, without using the Error Correction Mode. ) I Voice memory capacity*4: Approx. 30 minutes of recording time including greeting messages *1 Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other party's machine. *2 Transmission speed is based upon the ITU-T No. If the capability of the other party's machine is inferior to your unit, the transmission time may be longer. [. . . ]