User manual PANASONIC KX-P7305

[. . . ] Laser Printer Operating Instructions Model No. KX-P7305 / KX-P7310 KX-P7305 is supplied without a network interface. KX-P7310 comes standard with a USB, Parallel, and Network interfaces. The Operating Instructions consist of the following 3 files. · Print. pdf · Mainte. pdf · Network. pdf These files can be opened by clicking on the hilighted names below. The printer's setup, operation, and features are described on the following pages of this file. Settings and Printing (Print. pdf) This section contains information on cautions, parts identification, loading media and printing and printer setup (Windows & Mac). Maintenance and Specifications (Mainte. pdf) This section contains information on cleaning the printer, replacing supplies, clearing jams, troubleshooting, error messages, repacking and specifications of the printer, media to be used and interface. Network (Network. pdf) This section contains the information to configure the printer on a network. Please carefully read the Operating Instructions before operating. [. . . ] Check the media usable or not (see "Media" on page 53). Check the environment (see ABCD------------------------------- Incorrect type of media is used. Your printer is in extremely high humidity. "Specifications" on page 49). Set the media type setting of the printer driver correctly (see 44 , 91 or 110 in "Settings and Printing"). Replace the toner cartridge. Faded image is printed at the different position from the original. Printer driver is not set correctly for paper. ABCD------------------------------ABCD------------------------------- The toner cartridge has reached the end of useful life. Your printer is in extremely high or low humidity. Media is wet or dry. Check the environment (see "Specifications" on page 49) Set the Adjustment to media setting for + value (+1, +2 or +3) (see "Adjustment to Media" on page 41 in "Settings and Printing"). Settings and Printing Trouble Small dots are printed at the different position from the original Maintenance and Spec. Possible Cause Media is wet or dry. Network Corrective Action 28 Troubleshooting Set the Adjustment to media setting for ­ value (­1, ­2 or ­3) (see "Adjustment to Media" on page 41 in "Settings and Printing"). ABCD------------------------------- Toner spots appear on the page. Toner spots put on the photosensitive drum. Wipe the photosensitive drum with soft cloth (refer to "Cleaning the Photosensitive Drum" on page 37). Replace the drum unit. Clean the corona wire in the drum unit (see "Cleaning the Printer" ABCD------------------------------- The drum unit is damaged. The corona wire in the drum unit is dirty. on page 8). The entire page prints in black. Replace the drum unit. Settings and Printing Trouble A white or black spots appear in intervals of 94 mm (3. 7). Maintenance and Spec. Possible Cause Paste/Glue of a label or dust is attached to the photosensitive drum. Network Corrective Action Wipe the photosensitive drum (see "Cleaning the 29 Troubleshooting Photosensitive Drum" on page 37). Replace the drum unit. 94 mm (3. 7) 94 mm (3. 7) The photosensitive drum is dirty or scratched. Edge(s) of the sheet is stained. The photosensitive drum is stained. Wipe the photosensitive drum (see "Cleaning the Photosensitive Drum" on page 37). White or black dots appear entirely. The photosensitive drum is stained. Wipe the photosensitive drum (see "Cleaning the Photosensitive Drum" on page 37). The inside of the printer or dust scraper is dusty. Clean the inside of the printer or dust scraper ("Cleaning the Dust Scraper" on page 41). Settings and Printing Trouble Horizontal lines appear in intervals of 94 mm (3. 7). Maintenance and Spec. Possible Cause A small dust is bitten in the gear of the photosensitive drum. Dust Network Corrective Action 30 Troubleshooting Remove the dust from the gear (see "Cleaning the Photosensitive Drum" on page 37). 94 mm (3. 7) 94 mm (3. 7) White and horizontal lines appear on the page. The drum unit is damaged. The toner cartridge is stored for a long period. (Try shaking to loosen toner. ) Replace the drum unit. Print several blank pages until the lines disappear. Try shaking to loosen toner. ABCD------------------------------- A black and vertical line appears on the page. Corona wire of the drum unit is dirty. The fuser unit is damaged. Clean the corona wire in the drum unit (see "Cleaning the Printer" on page 8). ABCD------------------------------Replace the toner cartridge. Display the Remote Control Panel and select Fuser Cleaning from the Tool menu to print a cleaning data (see "Remote Control Panel" on page 28 in "Settings and Printing"). If it is not recovered, call for service to replace the fuser unit. Settings and Printing Trouble A white vertical line appears on the page. Maintenance and Spec. Possible Cause The laser unit cover is dirty. Network Corrective Action Clean the laser unit cover (see 31 Troubleshooting "Cleaning the Printer" on page 8). A small matter is mixed with the roller of the toner cartridge. Replace the toner cartridge. ABCD------------------------------- The printer prints aslant. The media is not installed correctly. Too much media is loaded in the media tray. Incorrect type of media is used. ------ABCD- ---------------------- Install media correctly in the media tray. Decrease the media stack so that the height of media does not exceed the limit mark. Check the media usable or not (see "About Media" on page 9 in "Settings and Printing"), (see "Media" on page 53). [. . . ] Sets zone name to which KX-P7310 belongs. If blank, KX-P7310 will automatically belong to the zone name where the AppleTalk router is set. SMB Name Use NetBEUI Protocol Use NetBIOS over TCP/IP Computer Name Workgroup Comment Activate Master Browse Function Factory Default ENABLE ENABLE MLPxxxxxx MLP-Printer NULL ENABLE Description Enables or disables NetBEUI protocol. This name is shown as the computer in Windows Explorer. Sets the workgroup the KX-P7310 belongs to. [. . . ]