User manual PANASONIC KX-PPRC7

[. . . ] Do not subject this product to excessive smoke, dust, mechanical vibration or shock. environment · Do not use this product near water. ⷠThis product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5 °C or greater than 40 °C. [. . . ] It should also not be placed in rooms where the temperature is less than 5 °C or greater than 40 °C. warning: · To prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture. ⷠUnplug this product from power outlets if it emits smoke, an abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact an authorised service centre. ⷠDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. From the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. This may cause a short circuit, electric shock, and/or fire. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. (It is normal for the adaptor to feel warm during use. ) Location · For maximum distance and noise-free operation, place your base unit: - away from electrical appliances such as TVs, radios, personal computers, or other phones. Ensure correct polarities (S, T) when installing the batteries. ⷠWipe the battery ends (S, T) with a dry cloth. ⷠWhen installing the batteries, avoid touching the battery ends (S, T) or the unit contacts. Place the handset on the charger for about 7 hours before initial use. " when the handset is placed on the charger if it is not registered to a base unit. [. . . ] ⷠWhen installing the batteries, avoid touching the battery ends (S, T) or the unit contacts. Place the handset on the charger for about 7 hours before initial use. " when the handset is placed on the charger if it is not registered to a base unit. ⷠIf you fully charged the batteries, but the operating time seems to be short, wipe the battery ends (S, T) and the unit contacts with a dry cloth. [. . . ]