User manual PANASONIC KX-PRX150E

[. . . ] Quick Guide Premium Design Phone with Touchscreen Model No. KX-PRX150E Thank you for purchasing a Panasonic product. Please read this document before using the unit and save it for future reference. For detailed information about the features of your phone system, refer to the Operating Instructions, which is available by tapping in the home screen or by visiting the support page for this product at the address below. http://www. panasonic. net/pcc/support/tel/sdect Please access our online customer survey: http://panasonic. net/pcc/tel/q PRX150E_QG_(en-en)_0724_ver. 020. pdf 1 2013/07/24 11:46:30 Introduction Accessory information Supplied accessories No. [. . . ] 0844 844 3899 Ireland 01289 8333 PRX150E_QG_(en-en)_0724_ver. 020. pdf 10 2013/07/24 11:46:31 Important Information R W-CDMA connection only: up to 290 hours Power source R Base unit: 220–240 V AC, 50/60 Hz R Charger: 100–240 V AC, 50/60 Hz Base unit power consumption R Standby: approx. 0. 8 W Charger power consumption R Standby: approx. 4. 0 W Operating conditions R 0 °C–40 °C, 20 %–80 % relative air humidity (dry) Charging conditions R 5 °C–40 °C *1 Use the control panel to turn the DECT connection on or off. See the Operating Instructions for more information (download information is on page 1). Helpline Tel. 0844 844 3899 Ireland 01289 8333 11 PRX150E_QG_(en-en)_0724_ver. 020. pdf 11 2013/07/24 11:46:31 Getting Started Preparing the base unit A Insert the AC adaptor plug firmly into the base unit. B Secure the cord by wrapping around the hook. C Connect the AC adaptor to the power outlet. D Insert the telephone line cord into the base unit and the telephone line jack until you hear a click. E DSL/ADSL service users only: Connect your DSL/ADSL filter (not supplied). Note: R Use only the supplied Panasonic AC adaptor PNLV226E. R Use only the supplied telephone line cord. D E D C A B Preparing the charger A Insert the AC adaptor plug firmly into the charger. B Connect the AC adaptor to the power outlet. Note: R Use only the supplied Panasonic AC adaptor PNLV230E. B A Preparing the handset Inserting a SIM card, microSD card, and the battery A SIM card (not supplied) allows the handset to connect to a mobile phone service. Consult your mobile phone service provider for more information. A microSD card (not supplied) allows you to expand the handset’s storage capabilities. 12 Helpline Tel. 0844 844 3899 Ireland 01289 8333 PRX150E_QG_(en-en)_0724_ver. 020. pdf 12 2013/07/24 11:46:31 Getting Started Important: R When removing the battery, make sure you turn off the handset first. R To avoid loss of data or malfunction, do not damage, carelessly handle, or short-circuit the gold-coloured contacts of the SIM card or microSD card. 1 Remove the handset’s cover. 2 Position the SIM card with the gold-coloured contacts facing down, and then carefully slide the SIM card all the way into the SIM card slot. 3 Open the microSD card cover by sliding it toward the nearest side of the handset (A) and then lifting up (B). B A 4 Insert the microSD card with the gold-coloured contacts facing down, close the microSD cover (A), and then gently slide the cover toward the opposite side of the handset (B). A B 5 Insert the battery (A) and lower it into the handset (B). B A Helpline Tel. 0844 844 3899 Ireland 01289 8333 13 PRX150E_QG_(en-en)_0724_ver. 020. pdf 13 2013/07/24 11:46:31 Getting Started 6 Attach the cover. Charging the handset Charge the handset for about 5 hours before initial use. The charge indicator (A) lights while the handset is charging and turns off when the handset is fully charged. Important: R If the handset is placed into the charger while talking on the phone, the call is not disconnected. A A or Place the handset into the charger. Connect the AC adaptor directly to the handset. Battery power icon When the screen is turned on, the battery icon in the upper-right corner of the screen indicates the battery power as described below. ® Very low Note: R When the handset is charging, is displayed inside the battery power icon. R You can also check the percentage of battery power remaining. [. . . ] R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL service provider for details. Noise is heard, sound cuts in and out. Caller ID support The base unit is Caller ID compatible. Caller ID is a service provided by your landline phone service provider which may require a subscription. Contact your landline phone service provider for details and availability. 24 Helpline Tel. [. . . ]