User manual PANASONIC KX-R193

[. . . ] KX-TG6711 KX-TG6711 KX-TG6711 KX-TG6721 KX-TG6721 KX-TG6721 KX-TG6721 Handset Part No. KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 Quantity 1 2 3 1 2 3 4 R The suffix (E) in the following model numbers will be omitted in these instructions: KX-TG6711E/KX-TG6712E/KX-TG6713E/KX-R193/KX-TG6722E/KX-TG6723E/ KX-TG6724E Feature differences Series KX-TG6711 series KX-TG6721 series *1 Answering system ­ U Intercom Between handsets U*1 U*1 Single handset models: Intercom calls can be made between handsets by purchasing and registering one or more optional handsets (page 5). Helpline Tel. 0844 844 3899 Ireland 01289 8333 3 TG67xxE(en)_1226_ver022. pdf 3 2011/12/26 11:45:55 Introduction Accessory information Supplied accessories No. A B C D E *1 *2 *3 A Accessory item/ Part number AC adaptor/ PNLV226EZ Telephone line cord/ PNJA1037Z (for U. K. ) Rechargeable batteries*1 Handset cover*2 Charger*3 Quantity KX-TG6711 KX-TG6721 1 1 2 1 ­ KX-TG6712 KX-TG6722 2 1 4 2 1 KX-TG6713 KX-TG6723 3 1 6 3 2 KX-TG6724 4 1 8 4 3 See page 4 for replacement battery information. [. . . ] A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Set the date and time beforehand (page 16). 3 MbN: Select the desired alarm option. "Once" An alarm sounds once at the set time. "Daily" An alarm sounds daily at the set time. "Weekly" Alarm sounds weekly at the set time(s). 4 1 2 Proceed with the operation according to your selection in step 3. n Once: Enter the desired date and month. a #720 Select an alarm by pressing 1 to 3. 0844 844 3899 Ireland 01289 8333 TG67xxE(en)_1226_ver022. pdf 28 2011/12/26 11:45:57 Programming n Weekly: MbN: Select the desired day of the week and press . a Turning night mode on/off 5 6 7 Set the desired time. a Enter a text memo (10 characters max. ; page 42). a R We recommend selecting a different ringer tone from the one used for outside calls. 1 2 3 #238 MbN: Select the desired setting. M N Viewing/editing/erasing bar call numbers 1 2 3 #217 MbN: Select the desired entry. R To exit, press M To edit a number: a Edit the phone number. a aM N To erase a number: a MbN: "Yes" a aM Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. Important: R When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list after the call is (page 33) with disconnected. N Note: R When editing, press the desired dial key to to erase. add, Setting call restriction You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code. Storing unwanted callers You can store up to 30 phone numbers in the call barred list. Important: R You must store the phone number with an area code in the call barred list. n From the caller list: 1 MFN ( ) 1 2 3 #256 Enter the base unit PIN (default: "0000"). [. . . ] If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 37). Turn it on (page 38). I cannot operate the answering system remotely. Helpline Tel. 0844 844 3899 Ireland 01289 8333 47 TG67xxE(en)_1226_ver022. pdf 47 2011/12/26 11:45:58 Useful Information Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. [. . . ]