User manual PANASONIC KX-RC105

[. . . ] (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. L In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: L Panasonic Communications Co. , Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. [. . . ] Consult your service provider/telephone company for details. Caller ID features When an outside call is received, the caller's phone number will be displayed. L Phone numbers of the last 50 callers will be logged in the caller list. L While listening to a message recorded by the answering system using the handset, you can call back the caller without having to dial the phone number (KX-TG7120, KX-TG7122, and KX-TG7123 only; page 25). L When caller information is received and it matches a phone number stored in the unit's phonebook, the stored name will be displayed and logged in the caller list. L If the unit is connected to a PBX system, you may not receive the caller information. L When the caller dialled from an area which does not provide Caller ID service, "Out of Area" will be displayed. L When the caller requested not to send caller information, either no information or "Private Caller" will be displayed. Missed calls If a call is not answered, the unit treats the call as a missed call. The number of missed calls is shown on the display. This lets you know if you should view the caller list to see who called while you were out. Note: L If message memory becomes full: ­ "Answer Sys. Full" is shown on the handset display ­ the answer on indicator on the base unit flashes rapidly 1 {j/OK} i "Answer System" i {>} 2 "Record Greeting" i {>} L Hold the handset about 20 cm away and speak clearly into the microphone. 3 Press {j/OK} to stop recording. i {ih} Using a prerecorded greeting message If you erase or do not record your own greeting message, the unit will play a prerecorded greeting message for callers and ask them to leave messages. If the message recording time (page 27) is set to "Greeting Only", caller messages will not be recorded and the unit will play a different prerecorded greeting message asking callers to call again. Turning the answering system on/off Using the base unit Press {s} to turn on/off the answering system. L When the answering system is turned on, the answer on indicator lights up. Using the handset 1 {j/OK} i "Answer System" i {>} Playing back the greeting message 1 {j/OK} i "Answer System" i {>} 2 "Play Greeting" i {>} i {ih} Helpline Tel. 01289 8333 23 TG7100-7120E(e). book Page 24 Tuesday, July 4, 2006 3:29 PM Answering System Features (KX-TG7120/KX-TG7122/KX-TG7123) Erasing the greeting message If you erase your own greeting message, the unit will play a prerecorded greeting message for callers. Using the handset 1 {j/OK} i "Answer System" i {>} 1 {j/OK} i "Answer System" i {>} 2 "Play New Msg. " or "Play All Msg. " i {>} 2 "Erase Message" i {>} 3 "Erase Greeting" i {>} 4 "Yes" i {>} i {ih} Repeating, skipping, stopping, erasing a message during playback L To repeat a message during playback: ­ for the base unit, press {7} ­ for the handset, press {<} If pressed within the first 5 seconds of a message, the previous message will be played. L To skip a message during playback: ­ for the base unit, press {8} ­ for the handset, press {>} L To stop a message during playback: ­ for the base unit, press {} ­ for the handset, press {9} L To erase a message during playback: ­ for the base unit, press {4} ­ for the handset, press {*}{4} Listening to messages Messages are stored and played back chronologically, from oldest message to newest. Listening to new/all messages When you have new messages: ­ {6} on the base unit flashes ­ the message indicator on the handset flashes if the message alert feature (page 17) has been turned on Note: L To adjust the speaker volume during playback, press {^} or {V}. L If new messages have been recorded, the base unit plays back new messages. L If there are no new messages, the base unit plays back all messages. Note: L After playing back all of the new messages, {6} will stop flashing but the answer on indicator will remain lit up when the answering system is turned on. Erasing all messages Using the base unit Press {4} 2 times. [. . . ] 61 mm × 87 mm × 95 mm Mass (weight): Base unit*3: Approx. 90 g *1 KX-TG7120, KX-TG7122, and KXTG7123 only *2 KX-TG7102, KX-TG7103, KX-TG7122, KX-TG7123 only *3 KX-TG7100, KX-TG7102, and KXTG7103 only Note: L Specifications are subject to change. L The illustrations used in these operating instructions may differ slightly from the actual product. Helpline Tel. 01289 8333 37 TG7100-7120E(e). book Page 38 Tuesday, July 4, 2006 3:29 PM Useful Information Conditions of guarantee This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. [. . . ]