User manual PANASONIC KX-T1456BE

[. . . ] or Puerto Rico. Table of Contents Introduction Introduction . 5 Additional/replacement accessories 5 Sales and support information. 8 Preparation Symbols used in these operating instructions . 13 Connecting the handset and AC adaptor . [. . . ] Select "Phone Setup", then press {MENU/SET}. Note: L You can only talk with an extension who answers first. Answering all pages Press {INTERCOM}. For assistance, please visit http://www. panasonic. com/phonehelp 39 Multi-unit Operation Room monitor You can monitor a room using the intercom feature. For example, you can monitor a baby from different areas of the house. To use this feature, turn auto mute off at the destination extension. Important: L Turn auto mute off at the destination extension (see "Turning auto mute on/ off " on page 39). L Make sure that the destination unit is in standby mode. Transferring calls You can transfer an outside call to another extension. The speed dial (extension) buttons "1, 2, 3. . . 15, 16" mean the extension numbers "11, 12, 13. . . 25, 26". Blind transfer 1 2 During an outside call, press {TRANSFER} to put the call on hold. Press the speed dial (extension) button or enter the extension number, then place the handset on the cradle. L If the transferred extension does not answer within 1 minute, the transferred call will ring at all extensions. 1 Press {INTERCOM} 2 times. L The SP-PHONE indicator lights and the speakerphone turns on. L To hang up both lines, place the handset on the cradle or press {SP-PHONE}. L To hang up only one line, press the line button for the party with which you want to continue talking. L To put both lines on hold, press {HOLD}. ­To talk with only one caller, press the line button for the party with which you want to continue talking. ­To resume both lines, press the relevant line button, then press {CONFERENCE}. 3 Answering transferred calls The line indicator flashes rapidly and the extension number of the caller is displayed. Lift the handset or press {SP-PHONE} or a line button. Answering a transferred call directed to another extension Any extensions can answer a transferred call directed to another extension. Press the relevant line button. Note: L If a call is kept on hold for more than 60 or 120 seconds, an alarm tone starts to sound (hold reminder). To turn off the hold reminder, see "Hold reminder" on page 29. L If a call is kept on hold for more than 5 minutes, the call is disconnected. For assistance, please visit http://www. panasonic. com/phonehelp 41 Multi-unit Operation Conference with an outside call and an intercom call While you are talking with an outside caller, one more extension can join the conversation and establish a conference call. 1 2 3 During an outside call, press {INTERCOM} to put the call on hold. To page another extension, press the speed dial (extension) button or enter the extension number. [. . . ] You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. [. . . ]