User manual PANASONIC KX-T2373FX

[. . . ] Integrated Telephone System Preparation Model No. KX-T2373FXW Pulse-or-tone dialing capability Operating Instructions Basic Operation Advanced Operation Useful Information PLEASE READ BEFORE USE AND SAVE. Before Initial Use Thank you for purchasing your new Panasonic integrated telephone. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Accessories (included) Handset . 9) 2 Contents Preparation Location of Controls . 15 Connecting the Handset/Telephone Line Cord . [. . . ] This prevents misdialing when you redial or dial a stored number. Pressing (PAUSE) more than once increases the length of the pause between numbers. 17 " Special Features Muting Your Conversation Press (MUTE) while talking. The MUTE indicator lights. The other party cannot hear you but you can hear them. To resume the conversation, press (MUTE) again. Turning Music Played During the Hold ON/OFF You can turn ON/OFF playing music during the hold as follows. Your phone comes from the factory set to ON. Make sure that a call is not put on hold. 1 2 3 4 5 Press (PROGRAM). The MUTE indicator flashes. (PROGRAM) Press (MUTE). Press (4). To turn OFF, press (2). The unit will return to the standby mode. (MUTE) and Indicator 18 " FLASH Button Pressing (FLASH) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. Selecting the flash time The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "80, 90, 100, 110, 200, 250, 300, 400, 600, 700 ms (milliseconds)". Your phone comes from the factory set to "100 ms". Make sure that a call is not put on hold. 1 2 3 4 5 Press (PROGRAM). The MUTE indicator flashes. (PROGRAM) Press (MUTE). Press (2). Advanced Operation (MUTE) and Indicator Press a dialing button ((1) to (0)). (1) : 80 ms (5) : 200 ms (9) : 600 ms (2) : 90 ms (6) : 250 ms (0) : 700 ms (3) : 100 ms (7) : 300 ms (4) : 110 ms (8) : 400 ms Press (PROGRAM). A long beep sounds. The unit will return to the standby mode. If the unit is connected via a PBX, you may not use PBX functions (transferring a call, etc. ) properly. Consult your PBX supplier for the correct setting. 19 " Special Features Setting the PIN Code A 4-digit PIN Code (Personal Identification Number) prevents unauthorized persons from using your unit. The PIN Code is required for the dial lock and call restriction to be set or canceled. The factory preset PIN code is "1111". Make sure that a call is not put on hold. 1 2 3 4 5 6 7 Press (PROGRAM). The MUTE indicator flashes. (PROGRAM) Press (MUTE). Press (5). Enter the current PIN code. (MUTE) and Indicator Press (PROGRAM). If a correct PIN code is entered, a beep will sound. If a wrong PIN code is entered, 3 beeps will sound. Enter the correct PIN code and press (PROGRAM). To return to the standby mode, lift the handset and hang up. Enter a new PIN code using a 4-digit number. Press (PROGRAM). A long beep sounds. The unit will return to the standby mode. Please write down your PIN code. If you forget your PIN code, consult your nearest Panasonic service center. 20 " Dial Lock You can prevent others from making a call to any number except the one pre-programmed in the memory of the EMERGENCY button. Once you locked the dialing buttons, even emergency numbers cannot be dialed. Only incoming calls are accepted until the dial lock is canceled. Before using this feature, we recommend storing an emergency number in the memory (EMERGENCY) of the EMERGENCY button (p. [. . . ] Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling the battery(ies) in order not to short the battery(ies) to conductive materials such as rings, bracelets, and keys. The battery(ies) and/or conductor may overheat and cause burns. [. . . ]