User manual PANASONIC KX-T4036E

[. . . ] Temporary tone dialing (for rotary/ pulse service users) . . 29 29 29 30 30 31 31 31 32 33 34 35 35 35 36 36 36 36 37 37 38 38 40 42 42 42 43 43 43 44 44 44 45 47 48 49 Speed Dialer Preparation Symbols used in these operating instructions . 13 Connecting the handset and AC adaptor . 14 Connecting the telephone line cords . [. . . ] You can select the following flash time: 80 ms, 100 ms, 200 ms, 300 ms, 400 ms, 500 ms, 600 ms, and 700 ms. The default setting is "600 ms". Important: L Make sure that the unit is in standby mode. Temporary tone dialing (for rotary/pulse service users) You can temporarily switch the dialing mode to tone when you need to access touch tone services (for example, answering services, telephone banking services, etc. ). Press {*} (TONE) before entering access numbers which require tone dialing. 1 2 3 Press {MENU/SET}. Select "Phone Setup", then press {MENU/SET}. Select "Flash Time", then press {MENU/SET}. Flash Time Hold Reminder Handsfree Mode [V/^]:Scroll 4 Select the desired setting, then press {MENU/SET}. Flash Time =600 ms [SET]:Save [V/^]:Change 5 Press and hold {MENU/SET} to return to standby mode. Note: L To return to the previous menu, press {<}. L If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call, etc. ). Consult your PBX installer for the correct setting. 30 For assistance, please visit http://www. panasonic. com/phonehelp Speed Dialer Speed Dialer Speed dialer You can store up to 32 names and phone numbers in the speed dial buttons. (16 names and numbers in upper memory locations, 16 names and numbers in lower memory locations. ) 6 Press and hold {MENU/SET} to return to standby mode. Note: L To return to the previous menu, press {<}. Speed dial preference If you want to place speed dialer calls using only one button, set this feature to "CO Call". 1 9 ABCabc 2 DEFdef GHI ghi kl 3 4 5 10Enter (or edit) the phone number JKLj MNOmn o 6 PQRSp q r TUVt uv8 s7 WX Y Z w x y z 9 Space 0 ; # 11 Select "Done", then press {MENU/SET}. L To cancel, select "Cancel", then press {MENU/SET}. 12Press and hold {MENU/SET} to return to standby mode. Note: L To return to the previous menu, press {<}. L To enter another character that is located on the same dial key, first press {>} to move the cursor to the next space. Editing/correcting a mistake Press {<} or {>} to move the cursor to the character or number you want to erase, select "Delete Char", then press {MENU/SET}. Enter the appropriate character or number. Storing items from the redial list into the speed dialer Important: L Make sure that the unit is in standby mode. 1 32 Press {REDIAL/PAUSE}. For assistance, please visit http://www. panasonic. com/phonehelp Speed Dialer 2 3 4 Press {V} or {^} to select the desired number, then press {MENU/SET}. Select "Copy To SPD", then press {MENU/SET}. Press the speed dial button ({1} to {16}). OR Press {LOWER}, then press the speed dial button ({1} to {16}). 3215555 Erasing a stored entry Important: L Make sure that the unit is in standby mode. 1 2 3 Press {MENU/SET}. Select "Phone Setup", then press {MENU/SET}. Select "Speed Dial", then press {MENU/SET}. [. . . ] You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. [. . . ]