User manual PANASONIC KX-T4300BE

[. . . ] 5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connecting the Handset/Telephone Line Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connecting a Communication Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Turning the Ringer On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · The indicator light goes out. Basic Operation MIC (SP-PHONE/HEADSET) and Indicator · When the ringer volume is set to OFF (p. 8), the unit will not ring. During speakerphone operation: · For best speakerphone performance, talk alternately with the other party in a quiet room. · If the other party complains that your voice is hard to hear, press VOLUME to decrease the speaker volume. · You can switch to the handset by lifting it up. To switch back to the speakerphone, press (SP-PHONE/HEADSET). 13 One-Touch Dialler You can store up to 16 phone numbers in the one-touch auto dial buttons (8 numbers in UPPER memory locations, 8 numbers in LOWER memory locations). Storing Phone Numbers in Memory To prevent possible errors, do not press any one-touch auto dial buttons before storing. To store in an UPPER memory location It is recommended that you program an emergency number in the top left one-touch auto dial button. 1 2 3 4 5 6 Lift the handset. ·" " is displayed. Press one of the one-touch auto dial buttons. ·" " is displayed. Enter a phone number up to 21 digits. · The entered number is displayed. · To store other numbers, repeat steps 1 through 6. One-Touch Auto Dial Buttons (PROGRAM) 14 To store in a LOWER memory location 1 2 3 4 5 6 7 Lift the handset. ·" " is displayed. Press (LOWER) to select a lower memory location. ·" " is displayed. Press one of the one-touch auto dial buttons. To prevent possible errors, do not press any memory stations before storing. 1 2 3 4 5 6 7 Lift the handset. ·" " is displayed. Press (AUTO). ·" " is displayed. Ex. (1) is pressed. Press a memory station number ((0) to (9)). · The entered number is displayed. · The other party cannot hear your voice but you can hear them. · To resume the conversation, press (MUTE) again. RECALL Button Pressing (RECALL) allows you to use special features of your host PBX such as transferring an extension call or accessing a special telephone service (optional) such as call waiting. Selecting the recall time The recall time depends on your telephone exchange or host PBX. You can select the recall times 100 or 600 msec (milliseconds). Your phone comes from the factory set to 100 msec. · To cancel during programming, replace the handset. · If 4 beeps sound during programming, a wrong key was pressed. [. . . ] If " " is displayed, press (MUTE). · Check that the handset is off the cradle. · Do not enter a phone number more than 21 digits long, or the entered number will be erased. · The button has a double function as either redial or pause. [. . . ]