User manual PANASONIC KX-T4550DB

[. . . ] Name and telephone number Caller ID service is required for the Talking Caller ID feature. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting. Attach your purchase receipt here. Energy Star: · As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. registered mark. Trademarks: openLCR, openLCR. com, and the openLCR logo are the trademarks of openLCR. com, Inc. Accessories (included) For extra orders, call 1-800-332-5368. AC Adaptor (p. [. . . ] · The total recording time (including greeting message) is about 17 minutes. If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes. · A maximum of 64 messages (including greeting message) can be recorded. Setting the Unit to Answer Calls Base Unit Press [ANSWER ON] to turn on the Answering System. · The indicator lights and the unit announces "Answer set" and current day and time. If "Set time" is heard, set the date and time (p. · The unit will announce the remaining recording time if it is less than 3 minutes. · When the remaining recording time is 0, " FULL " will be displayed on the base unit, ANSWER ON indicator will flash rapidly and the unit will announce "Memory full". You need to erase any unnecessary messages before new messages can be recorded (p. · To turn the Answering System off, press [ANSWER ON] again. The indicator light goes out and "Answer off" is heard. · The Answering System can be turned on remotely using any other phone (p. Handset [ANSWER ON] and Indicator 1 Press [MENU]. To resume the playback, press [MESSAGE/SLOW TALK] on the base unit within 15 seconds, or the voice menu will start (see below). · If noise interferes with the message playback: -- during playback using [ ], press [ ] (Channel). -- during playback using [ ], press [ ] (Channel). · At the end of the last message, "End of final message" is heard. The unit will announce the remaining recording time if it is less than 3 minutes. · If the unit starts to ring during the remote operation, press [ ] or [ ] to answer the call. To playback, start again from the beginning after hanging up. · If you hear "Memory full" after playback, erase unnecessary messages (p. 46). Voice menu If you do not press any buttons at the end of the last message, the unit will announce "End of final message" and the voice menu will begin. The unit announces, "Press 4 to play back new messages. Press 5 to play back all messages. " · You can press buttons for other options (p. [. . . ] Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. 69 THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". [. . . ]