User manual PANASONIC KX-TC1001W

[. . . ] Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID Services (CWID). Attach your purchase receipt here. Trademarks: openLCR, openLCR. com, and the openLCR logo are the trademarks of openLCR. com, Inc. Accessories (included) For extra orders, call 1-800-332-5368. [. . . ] · You can stop registration by pressing [OFF] on the handset, and pressing [HANDSET LOCATOR] on the base unit. For assistance, please call: 1-800-211-PANA(7262) 41 Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller's message is recorded. · The total recording time of all messages (greeting and incoming) is about 15 minutes. If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes. · To select the caller's recording time, see page 20. · A maximum of 64 messages (including greeting message) can be recorded. Setting the Unit to Answer Calls Base Unit Press [ANSWER ON] to turn on the Answering System. · The indicator lights and the unit announces [ANSWER ON] and Indicator "Answer set" and current day and time. Set time" is heard, set the date and time (p. · The unit will announce the remaining recording time if it is less than 3 minutes. · When no recording time is available, you will need to erase any unnecessary messages before new messages can be recorded (p. The unit can indicate that memory is full in the following ways: -- " FULL " will flash on the base unit and the ANSWER ON indicator will flash rapidly until you erase a message. -- The unit will announce "Memory full" when you press [ANSWER ON] or [GREETING REC], and after playing back messages or recording a message. 22), the Ringer/Message Alert indicator on the handset will flash slowly when new messages have been recorded and the handset is not in use. To play back messages 1 Press [MENU]. 2 Press Select at "Message play". · The unit announces the number of new messages and only new messages are played back from the speaker. To switch back to the speaker, press [s]. · When you have no new messages, the unit announces "No new messages. All message playback" and plays back all messages. · When you have no messages, the unit announces "No messages". · To play all messages, press [5]. · If you do not press any button, the voice menu will start (see below). Message play KBack dB SelectL MENU=Call back @4 =Erase msg SkipL KRepeat 3 To end remote operation, press [OFF]. · If a call is received during playback, the unit rings and playback stops. For playback, start again from the beginning after hanging up. · At the end of the last message, "End of final message" is heard. The unit will announce the remaining recording time if it is less than 3 minutes. [. . . ] For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (7262). When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. [. . . ]