User manual PANASONIC KX-TC1740B

[. . . ] Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting. Attach your purchase receipt here. Energy Star: As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U. S. registered mark. Trademarks: openLCR, openLCR. com, and the openLCR logo are the trademarks of openLCR. com, Inc. Accessories (included) For extra orders, call 1-800-332-5368. AC Adaptor (p. PQLV1Z (PQLV1) Telephone Line Cord (p. [. . . ] These codes help prevent the unauthorized use of your telephone line by another cordless telephone user. Temporary Tone Dialing (For Rotary or Pulse Service Users) Press (TONE) before entering access numbers which require tone dialing. ·The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. Muting Your Conversation Handset: Press (MUTE) while talking. ·The display on the right will be shown. (MUTE) was pressed. Talk <Mute> Base unit: Press (MUTE/RINGER) while talking. ·The SP-PHONE indicator flashes. ·The other party cannot hear your voice but you can hear theirs. ·To release the mute, press (MUTE), or on the handset or (MUTE/RINGER) or (SP-PHONE) on the base unit. For assistance, please call: 1-800-211-PANA(7262) 57 Special Features For Call Waiting Service Users Press (FLASH/CALL!WAIT/PLAYBACK) or (FLASH/CALL!WAIT) if you hear a call-waiting tone while talking. ·The first call is put on hold and you can answer the second call. ·To return to the first caller, press (FLASH/CALL!WAIT/PLAYBACK) or (FLASH/CALL!WAIT) again. ·The call waiting service cannot be used when: --the answering system is recording someone's message, or --a parallel connected telephone is in use. ·If this function does not operate properly, consult your telephone company for details. Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows your handset to display the second caller's information. After you hear a call-waiting tone while talking, the handset will display the caller's name with the phone number and "----Waiting----". BROWN, NANCY 1-555-666-7777 ----Waiting---- ·Please contact your telephone company for details and availability in your area. ·You can also turn on the answering system remotely using any other phone (p. 71). Monitoring incoming calls While a call is being recorded, you can monitor it through the speaker. To answer the call with the base unit speakerphone, press (SP-PHONE). The unit stops recording. 60 Listening to Messages You can see the total number of recorded messages on the base unit display. If MESSAGE PLAYBACK indicator flashes, new messages have been recorded. To play back messages, press (MESSAGE!PLAYBACK/SLOW!TALK). (MESSAGEÒPLAYBACK/SLOW!TALK) When you have new messages: the unit announces the number of new messages and only new messages are played back. When you have no new messages: the unit announces "No new messages. All message playback" and plays back all messages. When you have no messages: the unit announces "No messages". At the end of the last message, "End of final message" is heard. The unit will announce the remaining recording time if it is less than 5 minutes. During playback, the display shows the message number. MESSAGE PLAYBACK Indicator (STOP) (SKIP) (REPEAT) To increase the volume, press VOLUME . [. . . ] 3 Number of rings. . . . . . . . . . . . . . . . . . . . . . . . . . . 29 O openLCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 P PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Pulse service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]