User manual PANASONIC KX-TC1743B

[. . . ] Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID services (CWID). Attach your purchase receipt here. Copyright: This material is copyrighted by Panasonic Communications Co. , Ltd. , and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co. , Ltd. © 2004 Panasonic Communications Co. , Ltd. [. . . ] Press the line soft key ( LINE1 ) or ( LINE2 ) that is flashing or the line button that is flashing to return to the outside call. To transfer the call to another extension, repeat from step 1. OR To transfer the call to the Answering System to allow the caller to leave a message, perform the following steps: (1) Press [HOLD/INTERCOM] on the handset or [LOCATOR/INTERCOM/ TRANSFER] on the base unit. (2) Press [9] to transfer the caller to the Answering System greeting (p. (The caller will hear the greeting and can leave a message after the beep. ) Answering System Useful Information 59 For assistance, please call: 1-800-211-PANA(7262) Transferring a Call Quick call transfer You can transfer a call without waiting for the paged party to answer. Handset 1. Press the extension number ([0] for the base unit, [1] to [4] for the handset). Press [OFF] to hang up. Base Unit 1. During a call, press [LOCATOR/INTERCOM/TRANSFER]. Press the extension number [1] ( ) to [4] ( ), or press [0] to page all handsets. Press [SP-PHONE] to hang up. · The call will be transferred directly. · The paged party can answer the transferred call: -- for the handset, press [C], [s], or the line soft key ( LINE1 ) or ( LINE2 ). · During a conference, the outside call can be placed on hold by pressing [HOLD/ INTERCOM] on the handset or [HOLD] on the base unit. Internal communications between extensions are not suspended. Only the person who placed the call on hold can resume the full conference by pressing the soft key ( CONF ) on the handset or [CONF] on the base unit. · One more extension can join the conference call. To join the conference call, press the line soft key ( LINE1 ) or ( LINE2 ) on the handset, or the line button on the base unit. A maximum of 4 parties including the outside party can take part in a conference call if all other extensions are not being used. Call Share This feature allows the base unit or the handset to join an existing outside call. · To prevent other users from joining your conversation, turn the Call Privacy feature on (p. · A maximum of 4 parties including 1 or 2 outside parties can join a conversation if all other extensions are not being used. To join a conversation (Call Share) Handset Press the line soft key ( LINE1 ) or ( LINE2 ). · "Conference" is displayed. Base Unit Press the line button. 62 Room Monitor This feature allows you to monitor a room by using the intercom feature. For example, you can monitor a baby from different areas of the house. You can call the destination unit to monitor the room. [. . . ] Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. · Routine care -- wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When you leave the unit unused for a long period of time, unplug the AC adaptor from the outlet. [. . . ]