User manual PANASONIC KX-TC1743F

[. . . ] Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID Services (CWID). Attach your purchase receipt here. Trademarks: openLCR, openLCR. com, and the openLCR logo are the trademarks of openLCR. com, Inc. Accessories (included) For extra orders, call 1-800-332-5368. [. . . ] 47, 48). Preparation Selecting the flash time Handset The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". The factory preset is "700 ms". · If PBX functions do not work correctly, consult your PBX supplier for the correct settings. Telephone System 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). [B], then press the soft key ( SELECT ). Initial setting Set tel line Set flash time Set flash time 3 Scroll to "Set tel line" by pressing [d] or 4 Scroll to "Set flash time" by pressing [d] or [B], then press the soft key ( SELECT ). Answering System 5 Select the flash time by pressing [d] or [B]. 6 Press the soft key ( SAVE ), then press [OFF]. :700ms Useful Information 49 For assistance, please call: 1-800-211-PANA(7262) Special Features Incoming Call Tone Handset During an intercom call (p. 43), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. If this feature is turned off, no tones will be heard. Callers can then leave a message in a mailbox (p. 51). Setting the Unit to Answer Calls Base Unit Press [ANSWER ON] to turn on the Answering System. [ANSWER ON] and Indicator · The indicator lights and the unit announces "Answer set" and the current day and time. Set time" is heard, set the date and time (p. · The unit will announce the remaining recording time if it is less than 3 minutes. · When no recording time is available, you will need to erase any unnecessary messages before new messages can be recorded (p. The unit can indicate that memory is full in the following ways: -- " FULL " will flash on the base unit and the ANSWER ON indicator will flash rapidly. -- The unit will announce "Memory full" when you press [ANSWER ON], [GREETING REC], or [MEMO], and after playing back messages or recording a message. · If you do not want the unit to answer calls, press [ANSWER ON] again to turn off the Answering System. The indicator goes out and "Answer off" is heard. · You can also turn on the Answering System remotely from an outside phone (p. · If you subscribe to Caller ID (p. [. . . ] Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. · Routine care -- wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When you leave the unit unused for a long period of time, unplug the AC adaptor from the outlet. [. . . ]