User manual PANASONIC KX-TC187B

[. . . ] Read and understand all instructions. Thank you for purchasing your new Panasonic integrated telephone. Attach your purchase receipt here. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Accessories (included) To order replacement accessories, call 1-800-332-5368. TTY users (hearing or speech impaired user) can call 1-866-605-1277. PQJXF0101Z (White) PQJXF0102Z (Black) Handset Cord (p. PQJA212M (White) PQJA212N (Black) Telephone Line Cord (p. [. . . ] Press [6] twice, press [3] twice, then press [7] four times. T To Tom Tom Jo Tom Jones For assistance, please visit http://www. panasonic. com/phonehelp For assistance, please call: 1-800-211-PANA(7262) 29 Phonebook Dialing from the Phonebook Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off. 1 2 Press [2] or [1] to enter the Phonebook. 34 Phonebook 10 items Scroll to the desired item by using [4] or [3]. · All Phonebook items are stored in order shown on the right. · Item with # at the beginning will be displayed with first priority if Call Restriction is set to ON. Press [4]. Press [3]. Space i Alphabet Alphabet Symbol (excluding # and ¢) Number # and ¢ Telephone number (When a name is not stored) To search for a name by initial: 1. Press the dialing button for the first letter of the desired name until any name with the same initial is displayed (see the Index table on page 31) Ex. To find "Frank", press [3] repeatedly until the first item under "F" is displayed. Press [4] repeatedly until the name is displayed. 3 4 Lift the handset or press [SP-PHONE/ HEADSET]. To hang up, place the handset on the cradle or press [SP-PHONE/HEADSET]. · If "No items stored" is displayed in step 1, the Phonebook is empty. · You can exit the Phonebook any time by pressing [EXIT]. · You can also dial the stored number as follows: 1. Lift the handset or press [SP-PHONE/HEADSET]. Find the desired item (above steps 1 and 2). Press [OK] (Send key). 30 For assistance, please visit http://www. panasonic. com/phonehelp Index table Keys Index Symbols, 1, No name A, B, C, 2 D, E, F, 3 G, H, I, 4 J, K, L, 5 M, N, O, 6 Keys Index P, Q, R, S, 7 T, U, V, 8 W, X, Y, Z, 9 ¢ Space, 0 [1] [2] [3] [4] [5] [6] [7] [8] [9] [£] [0] [#] # Chain Dial You can dial a combination of Phonebook or manual key pad entries while making a call. [M1] is pressed. ) · The entered name and phone number are displayed. · After a few seconds, the display will return to step 2. To exit the programming mode, press [EXIT] or wait for 60 seconds. White, John 123-456-7890 34 For assistance, please visit http://www. panasonic. com/phonehelp If the Direct Dial button selected is M1 is occupied occupied, the display on the right will Overwrite ?[3]=No [OK]=Yes To overwrite, press [OK] (Yes key). To select other empty Direct Dial memory, press [3] (No key), press an empty Direct Dial button ([M1], [M2] or [M3]). · A long beep sounds. · To continue storing other items, repeat from step 2. · To exit the programming mode, press [EXIT] or wait for 60 seconds. To erase other stored items from the Direct Dial memory, see below. When using the Call Restriction feature (p. 40), you cannot store a phone number in the Direct Dial memory ([M1], [M2] or [M3]). You can exit the programming mode any time by pressing [EXIT]. [. . . ] You must mail-in your product during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United State or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. [. . . ]