User manual PANASONIC KX-TC280B

[. . . ] Read and understand all instructions. Caller ID, Call Waiting and Voice Mail Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID Services (CWID). After subscribing to Voice Mail Service, this unit will give you visual indication to let you know when there are messages in the mailbox. Attach your purchase receipt here. [. . . ] If a new message was recorded at your telephone company, "Voice Mail" will be displayed on the handset, and the Ringer/Message Alert indicator on the handset will flash slowly if Message Alert is turned on (p. Turn off this programming when: -- you do not subscribe to a voice mail service, -- your telephone company does not send a series of tones, followed by a continuous tone to indicate you have new voice mail, or -- your phone is connected to a business or office telephone system (PBX). If you are not sure which setting is required, consult your local telephone company or contact the Panasonic Customer Call Center. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. Initial setting Voice Mail KBack dB SelectL Advanced Operation 3 Press Select at "Voice Mail". 4 Scroll to "VM tone detect" by pressing [d] or [B], then press Select. KBack dB SelectL VM tone detect KBack dB SelectL 5 Select "Off" or "On" by pressing [d] or [B]. VM tone detect :On KBack dB SaveL 6 Press Save, then press [OFF]. For assistance, please call: 1-800-211-PANA(7262) 35 Voice Mail Service Listening to Voice Mail Messages Handset The unit will let you know that someone has left new voice mail for you: a) "Voice Mail" will be displayed on the handset, and b) the Ringer/Message Alert indicator on the handset will flash slowly if Message Alert is turned on (p. Handset on the base unit Voice Mail Charging Ex. Handset off the base unit Voice Mail Rcvd Phone book L Kcalls To listen to your voice mail message(s) 1 Press [MENU]. access". · The handset is connected to the telephone line and dials the access number (p. · If the handset beeps 3 times and "Store VM access#" is displayed, a voice mail access number is not stored. To store the number, see page 34. V. M. access K(VE) KBack dB SelectL Dial VM access# MuteL 3 Follow the pre-recorded instructions. · Contact your telephone company for details about availability in your area, and to verify that CWID service is activated on your telephone line. Using the PAUSE Key (For PBX Line/Long Distance Calls) Handset We recommend you press Pause or P if a pause is Example required for dial with a PBX or to make a long distance call. Line access number [9] (PBX) [9] N Pause or P N Phone number 9P15556667777| KClear · Pressing Pause or P once creates a 3. 5 second pause. d=Next PL Kf This prevents misdialing when you dial after confirming the entered number (p. · Pressing Pause or P more than once increases the length of the pause between numbers. PauseL OR 9P15551234567| 38 Special Features FLASH Button Handset Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. · Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the mute (p. 37). Selecting the flash time The flash time required depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". The factory preset is "700 ms". · If PBX functions do not work correctly, consult your PBX supplier for the correct settings. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. Initial setting Set tel line KBack dB SelectL 3 Scroll to "Set tel line" by pressing [d] or [B], then press Select. KBack dB SelectL 4 Scroll to "Set flash time" by pressing [d] or [B], then press Select. Set flash time Advanced Operation KBack dB SelectL 5 Select the desired time by pressing [d] or [B]. Set flash time :700ms KBack dB SaveL 6 Press Save, then press [OFF]. For assistance, please call: 1-800-211-PANA(7262) 39 Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [MENU]. [. . . ] This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of the original purchase date is required for warranty service. To obtain service in the USA please contact: Panasonic Services Company, Panasonic Plus Department 20421 84th Avenue South Kent, WA 98032 Tel: 1-800-833-9626 Fax: 1-800-237-9080 For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)768-2910. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Plus Department at 1-800-833-9626. When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. [. . . ]