User manual PANASONIC KX-TC934B

[. . . ] For hearing or speech impaired TTY users, call 1-866-605-1277. AAC Adaptor (p. PQLV1Z (PQLV1) ATelephone Line Cord (p. PQJA10075Z one one ABattery (p. PQKK10140Z2 one one ABelt Clip (p. [. . . ] · If a call is received during playback, the handset rings and playback stops. To answer the call, lift the handset, or press [C] or [SP-PHONE] if the handset is off the base unit. For playback, start again from the beginning after hanging up. During playback Base Unit To adjust the speaker volume To repeat a message To skip a message To stop playback To increase volume, press [>]. · If pressed within the first 5 seconds of playback, the previous message will be played. · To resume playback, press [MESSAGE]. · If you do not press any button for 60 seconds or if you press [STOP] again, playback mode will be canceled. 26 Erasing Messages Base Unit The unit will announce the remaining recording time after playback if it is less than 3 minutes. New messages cannot be recorded when: --"Memory full" is heard. --" FULL " flashes on the base unit. --the ANSWER ON indicator flashes rapidly (when the Answering System is on). We recommend you erase unnecessary messages after each playback. Erasing a specific message Press [ERASE] while the message you want to erase is being played. · The unit beeps, then plays back the next message. · If pressed within the first 5 seconds of playback, the previous message will be played. · To resume, enter a direct command within 15 seconds, or the voice menu will start (p. · A short beep will sound and the next message will be played. · A long beep will sound and "No messages" will be heard. · The unit hangs up. [2] : [9] : To turn on the Answering System Call your unit and wait for 15 rings. · The unit will answer and the greeting will be played. · The Answering System will be turned on. Hang up or enter the remote code for other options. · When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options. Skipping the greeting After calling your unit, press [*] during the greeting. · The unit skips the rest of the greeting and you can start recording your message after the long beep. 30 Wall Mounting This unit can be mounted on a wall phone plate. 1 Press the tabs in the direction of the arrows ( 1 ), then remove the wall mounting adaptor ( 2 ). 1 1 3 Tuck the telephone line cord inside the wall mounting adaptor, then push the adaptor in the direction of the arrows ( 1 and 2 ) while pressing the tabs. · The word "UP WALL" should face upward. 2 2 2 Connect the AC adaptor. · Fasten the AC adaptor cord to prevent it from being disconnected. 1 4 Connect the telephone line cord. [. . . ] A purchase receipt or other proof of the original purchase date is required for warranty service. To obtain service in the USA please contact: Panasonic Services Company, Panasonic Plus Department 20421 84th Avenue South Kent, WA 98032 Tel: 1-800-833-9626 Fax: 1-800-237-9080 For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)768-2910. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Plus Department at 1-800-833-9626. When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint, a return address and a day time phone number where you can be reached. This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. [. . . ]