User manual PANASONIC KX-TCC936B

[. . . ] PQJXE0401Z (Black) PQJXE0211Z (White) 4-Wire Telephone Line Cord with Green Plugs . PQJA10126X (Black) PQJA10126Z (White) 2-Wire Telephone Line Cord with Transparent Plugs. 10) 3 Contents Preparation Location of Controls . 14 Programming Summary of Preparations . [. . . ] Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. To erase a specific caller from the Caller List 1 2 3 Press (_) or (^) to enter the list. 11:50AM11/24 1-111-444-7777 TINA ROBINSON LINE 1 Press (_) or (^) repeatedly to find the caller you want to erase from the Caller List. Press (CLEAR). A beep sounds and the information is erased. After a few seconds, the display will show the previous caller information. To return to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds. 10:50AM11/23 LINE 2 x4 1-222-333-4444 JOHN SMITH 10:50AM11/23 CLEAR 10:00AM11/21 1-555-666-7777 JOHN WHITE LINE 2 Advanced Operation To erase all entries in the Caller List Make sure that the unit is in the standby mode. 1 2 Press (CLEAR). To stop erasing procedures, press (FUNCTION/EXIT). 11:50AM11/24 ALL CLEAR ? 11:50AM11/24 Press (fl) OK/EDIT. A beep sounds and all entries are erased. "NO ITEMS STORED" is displayed, and the unit returns to the standby mode. ALL CLEAR 11:50AM11/24 NO ITEMS STORED 31 Speed Dialer Storing Phone Numbers in the Speed Dialer Memory You can store up to 10 phone numbers in the Speed Dialer memory. The dialing buttons ((0) to (9)) function as memory stations. Do not press any memory stations before storing to prevent misoperation. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 2 3 4 5 Press (FUNCTION/EXIT). 11:50AM11/24 SAVE AUTO# ? Press (fl) OK/EDIT. 11:50AM11/24 ENTER PHONE NO. Enter a phone number, up to 22 digits. If you enter a wrong number, press (CLEAR) and enter the correct number. 11:50AM11/24 1234567890 AUTO=SAVE 11:50AM11/24 Press (AUTO). 1234567890 PRESS 0-9 Press a memory station number ((0) to (9)). You can continue storing other numbers after pressing (fl) OK/EDIT. To return to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds. 11:50AM11/24 1234567890 SAVE IN AUTO 1 11:50AM11/24 SAVE AUTO# ? You can exit the programming mode any time by pressing (FUNCTION/EXIT). If a pause is required for dialing, press (REDIAL/PAUSE) where needed. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 2 3 4 5 6 7 Press (FUNCTION/EXIT). 11:50AM11/24 SAVE AUTO# ? Press (_) or (^) repeatedly until "VOICE MAIL TONE?" is displayed. Press (fl) OK/EDIT. 11:50AM11/24 VOICE MAIL TONE? 11:50AM11/24 LINE 1 LINE1 Press (_) or (^) to select the desired line, "LINE1" or "LINE2". Press (fl) OK/EDIT (NEXT key). 11:50AM11/24 LINE 2 1=NEXT LINE2 11:50AM11/24 1=NEXT ON Press (_) or (^) to select the desired mode. Press (fl) OK/EDIT (SAVE key). A beep sounds and the setting is saved. To program the other line, start from step 3. To return to the standby mode, press (FUNCTION/EXIT). 1=SAVE You can exit the programming mode any time by pressing (FUNCTION/EXIT). 36 Listening to Voice Mail Message(s) After receiving a voice mail message, " " icon will flash on the display. To listen to your voice mail, perform the following steps. 1 2 3 4 Press (VOICE\MAIL). An icon of the line which has received voice mail messages will flash. Lift the handset or press (SP-PHONE/HEADSET). The unit is connected to the telephone line and automatically dials the number. Follow the pre-recorded instructions. When finished, place the handset on the cradle or press (SP-PHONE/HEADSET). The display will return to the standby mode. (FUNCTION/EXIT) 10:50AM11/23 LINE 2 x3 VOICE MAIL Advanced Operation (VOICE\MAIL) (SP-PHONE/HEADSET) The line which calls your voice mail service has priority over the line set using the "Line Selection" (p. If " " icon still flash after you have listened to your voice mail message(s), press (VOICE\MAIL), and then press and hold (CLEAR). If your voice mail service uses a voice mail tone and the recorded message is over 3 minutes long, " " icon may not flash. If your voice mail service uses a voice mail tone, the tone will be heard from any parallel connected phone on the same line. [. . . ] If such changes can be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service. When programming emergency numbers and/or making test calls to emergency numbers: 1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. Perform such activities in the off-peak hours, such as early morning hours or late evenings. 50 This device complies with Part 15 of the FCC Rules. [. . . ]