User manual PANASONIC KX-TCD430

[. . . ] Digital Cordless Phone Operating Instructions Model No. KX-TCD430E This unit is Caller ID compatible. To display the caller's phone number, you must subscribe to Caller ID service. Charge the batteries for about 7 hours before initial use. Please read these Operating Instructions before using the unit and save them for future reference. Table of Contents Preparation Accessory information . 13 Useful Telephone Settings Guide to handset settings . [. . . ] 7 Press {>} to select "ON", then press {ih}. Note: L When this feature is turned on, only the direct call number can be called. L While this feature is turned on, the following will be displayed. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 18 Helpline Tel. 01289 8333 Useful Telephone Settings Turning direct call on/off 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 3 Press {v} repeatedly to display "OTHER OPT", then press {>}. 3 Press {v} repeatedly to display "CALL OPT", then press {>}. 4 Press {v} repeatedly to display "AUTO TALK", then press {>}. 4 Press {v} repeatedly to display "SET DIRECT", then press {>}. 5 Press {v} repeatedly to select "ON" or "OFF", then press {>}. 5 Press {v} repeatedly to select "ON" or "OFF", then press {>}. 6 Press {ih}. Setting the battery type "NI-MH": Select when nickel metal hydride batteries are installed. "NI-CD": Select when nickel cadmium batteries are installed. 6 Press {ih}. Other options Changing the handset PIN (Personal Identification Number) The handset's default PIN is "0000". Important: L If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 3 Press {v} repeatedly to display "OTHER OPT", then press {>}. 4 Press {v} repeatedly to display "BATTERY TYPE", then press {>}. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 5 Press {v} repeatedly to select the desired setting, then press {>}. 6 Press {ih}. Resetting the handset to its default settings 3 Press {v} repeatedly to display "OTHER OPT", then press {>}. 4 Press {v} repeatedly to display "HSPIN CHANGE", then press {>}. 5 6 7 8 Enter the current 4-digit handset PIN. Enter the new 4-digit handset PIN again. Press {ih}. 1 Press {j}, {v}, {>}, {e} and {>}. 2 Enter "0000" (default handset PIN). L If you changed PIN, enter it (page 19). 3 Press {v}, {>} and {ih}. Note: L For the default settings, see page 15. L The battery type setting will not be reset. Setting auto talk This feature allows you to answer calls simply by lifting the handset off the base unit. You do not need to press {C}. 1 Press {j}. Helpline Tel. 01289 8333 19 Useful Telephone Settings Guide to base unit settings For your reference, a chart of all items which can be customised for the base unit is printed below. Details of each item can be found on the corresponding pages. {0} {1} Feature (Default setting) Reset base unit Set all or selected handsets to ring (All handsets ring) Base unit ringer volume (Medium) Time break recall or earth recall (Time break recall) Pause length (3 seconds) {5} Change base unit PIN ("0000") Call restriction Emergency number ("112" and "999") {7} {*} Cancel a handset*1 Time and date Page page 22 page 25 page 20 page 20 page 21 page 20 page 21 page 22 page 24 page 8 Base unit settings Changing base unit PIN (Personal Identification Number) The base unit's default PIN is "0000". Important: L If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 1 Press {j}. [. . . ] The appliance should be returned together with this guarantee and proof of date of purchase promptly on being found defective at the purchaser's risk and expense to the authorised dealer from whom the appliance was purchased or to the nearest authorised dealer. All enquires must be through such dealers. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse, wear and tear, neglect, incorrect adjustment or repair, to damage caused through installation, adaption, modification or use in an improper manner or inconsistent with the technical and/or safety standards required in the country where this appliance is used, or to damage occurred during transit to or from the purchaser. If at any time during the guarantee period any part or parts of the appliance are replaced with a part or parts not supplied or approved by us or of an objective quality safe and suitable for the appliance, or the appliance has been dismantled or repaired by any person not authorised by us, we shall have the right to terminate this guarantee in whole or in part immediately without further notice. [. . . ]