User manual PANASONIC KXTCD715GM

[. . . ] Please read this guide before using the unit and save it for future reference. Table of Contents Introduction About this guide . 5 Y Phonebook using the Handset Using the phonebook . 20 20 20 21 21 21 21 22 Getting Started Controls (Handset) . 6 Understanding the indicators on the base unit . [. . . ] L If this feature is set on your unit, it may be overridden by your phone system settings. L This feature is not available on shared lines. L The call is logged in the caller list (page 42) with Q after the call is forwarded. L If you have selected "No answer", enter the number of rings before the unit forwards calls (0, 2-20 rings). i {SAVE} 10 {EXIT} Changing the phone number 1 {MENU} (middle soft key) 2 {V}/{^}: "IP service" i {SELECT} 3 {V}/{^}: "Call features" i {SELECT} 4 {V}/{^}: "Call forward" i {SELECT} 5 Proceed with the desired operation. When 1 line is registered: Go to step 6. When 2 or more lines are registered: {V}/{^}: Select the desired line. i {SELECT} 6 7 8 {V}/{^}: Select the desired option. i {SELECT} {V}/{^}: "Phone number" i {SELECT} Enter the phone number you want to forward calls to (24 digits max. ). i {SAVE} i {EXIT} Turning call forward on/off 1 {MENU} (middle soft key) 2 {V}/{^}: "IP service" i {SELECT} 3 {V}/{^}: "Call features" i {SELECT} 4 {V}/{^}: "Call forward" i {SELECT} 5 Proceed with the desired operation. When 1 line is registered: Go to step 6. When 2 or more lines are registered: {V}/{^}: Select the desired line. i {SELECT} Changing the ring count You can change the number of rings before which the call is forwarded if "No answer" is selected. 1 2 3 4 5 {MENU} (middle soft key) {V}/{^}: "IP service" i {SELECT} {V}/{^}: "Call features" i {SELECT} {V}/{^}: "Call forward" i {SELECT} Proceed with the desired operation. When 1 line is registered: Go to step 6. i {SELECT} {V}/{^}: Select "On" or "Off". i {SAVE} i {EXIT} 6 Storing unwanted callers You can store up to 30 phone numbers in the call block list by using the caller list or by entering the numbers directly. Important: L You are advised to store the 10 digits (including an area code) for PSTN calls because if 7 digits are stored, all numbers that have the last 7 digits will be blocked. From the caller list: Block anonymous calls This feature allows the unit to reject calls when the unit receives a call without phone number. Important: L We recommend setting with your administrator. Contact your administrator for further information. L This feature is not available on shared lines. L The call is logged in the caller list (page 42) with Q after the call is rejected. 1 2 3 4 1 2 {CID} (right soft key) {V}/{^}: Select the entry to be blocked. i {MENU} {V}/{^}: "Save call block" i {SELECT} {V}/{^}: "Yes" i {SELECT} i {EXIT} {MENU} (middle soft key) i {#}{2}{1}{7} i {ADD} Enter the phone number (24 digits max. ). i {SAVE} L To erase a digit, press {CLEAR}. 1 2 3 4 5 {MENU} (middle soft key) {V}/{^}: "IP service" i {SELECT} {V}/{^}: "Call features" i {SELECT} {V}/{^}: "Block anonymous" i {SELECT} Proceed with the desired operation. By entering phone numbers: 37 : Programming using the Base Unit (KX-TGP550 only) 3 {EXIT} Viewing/editing/erasing call block numbers 1 {MENU} (middle soft key) i {#}{2}{1}{7} 2 {V}/{^}: Select the desired entry. L To exit, press {EXIT}. Date and time Set if the unit does not show the date and time. You can set the date and time through the Web user interface and also program it to adjust automatically using the SNTP. [. . . ] * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence. ] */ <<MD5>> This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321 (MD5 Message-Digest Algorithm). ----------------------------------------------------------------Copyright (C) 1991-2, RSA Data Security, Inc. [. . . ]