User manual PANASONIC KX-TCD725

[. . . ] KX-TCD725EM-0\(1) 01. 7. 19 10:25 PM Page 1 Digital Cordless Answering System Model No. KX-TCD725EM Operating Instructions DIG ITA L Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the batteries for about 15 hours before initial use. KX-TCD725EM-1(02~23) 01. 7. 19 10:24 PM Page 2 Dear purchaser, You have acquired a KX-TCD725EM, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterised by high-security protection against interceptions as well as high-quality digital transmission. This telephone was designed for a wide range of applications. For example, this telephone can be used within a network of base units and handsets, constituting a telephone system which: operates up to 6 handsets at one base unit allows an intercom between 2 handsets allows the operation of a handset at up to 4 base units, expanding the communication radio area. [. . . ] Press or until the arrow points . to "Battery Type", then press The current battery type is at the arrow. 5 Press or to select "Ni-Cd" or . 3 "Ni-MH", then press to "Other Option", then press The display will return to the "Battery Type". To return to the standby mode, press or wait for 60 seconds. Incorrect battery type selection may shorten battery life. 52 KX-TCD725EM-3(38~64) 01. 7. 19 10:42 PM Page 53 Reset Handset Settings This function enables the handset to clear the following setting at one time. They will return to their initial settings. Function Time alarm mode Alarm time Handset ringer volume External ringer type Internal ringer type Alarm type Paging ringer type Key tone Call waiting tone Range warning alarm Battery low alarm Standby mode display Initial setting OFF clear 3 (MEDIUM) 1 1 1 1 ON ON OFF ON Base unit number Function Talk mode display Call prohibition mode Display language Backlight colour Private colour Direct call number Direct call mode 4-digit handset PIN Auto talk Base unit access Handset receiver volume Redial memory Initial setting Length of the call OFF English Green Green Clear OFF 0000 OFF Automatic base unit access MEDIUM All clear Chapter 3 Programmable Function on the Handset Make sure that the power is ON (p. 12), and the unit is in the standby mode. 1 2 Press . 4 5 6 Press or until the arrow points to "Setting Handset", then press . Press or until the arrow points . Enter the 4-digit handset PIN (p. "Reset Handset" is displayed. Press or to select "YES". 3 to "Reset Handset", then press Enter H/set PIN 1 2 3 4 5 6 7 8 9 0 0 : ---- Press . A beep sounds and "CLEARED" is displayed. The display will return to "Reset Handset". To return to the standby mode, press or wait for 60 seconds. You can exit the programming mode any time by pressing . 53 KX-TCD725EM-3(38~64) 01. 7. 19 10:42 PM Page 54 Summary of Programmable Functions on the Base Unit You can select and execute answering system by pressing direct command as follows without programming. See the corresponding pages for function details. 12), and the unit is in the standby mode. <Standby mode> Base 1 10 New Calls 12. 04 15:00 <Function menu> Press . New Phonebook Setting Handset H Setting Base Press <Direct command> Press 1 , 4-digit base unit PIN, then 1 Press 1 , 4-digit base unit PIN, then 2 Press 1 , 4-digit base unit PIN, then 3 Press 2 . "Input Command" is displayed. To select the all handsets ringer mode (p. 56) To select the selected handset(s) ringer mode (p. 56) To select the selected then all handsets ringer mode (p. 57) To select the base unit ringer volume (p. 58) To select the tone/pulse dialling mode (p. 60) To change the 4-digit base unit PIN (p. 61) To cancel the handset registration in the base unit (p. [. . . ] eg. , during an external call, an internal call or outside call can be transferred to another handset. Multi-Base station operation: More than one handset can be registered to several base units, e. g. , for private and office applications. Equipment Manufacturer's Code (EMC) For identification, this unit is prepared with an EM Code, which can be applied to future operators in mobile networks. 97 Useful Information Chapter 7 KX-TCD725EM-5(86~100) 01. 7. 19 10:22 PM Page 98 GUARANTEE CONDITIONS OF GUARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts there of) repaired or replaced free of charge. [. . . ]