User manual PANASONIC KX-TCD735

[. . . ] KX-TCD735EM(E)-0\(1) 01. 10. 22 16:13 Page 1 Digital Cordless Answering System Model No. KX-TCD735EM Operating Instructions 1 4 7 2 5 8 0 3 6 9 1 GHI DIG ITAL ABC JKL 2 4 TUV DEF MNO 3 5 R PQRS 7 8 6 WXYZ 9 0 Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the batteries for about 15 hours before initial use. KX-TCD735EM(E)-1(02~31) 01. 10. 22 16:14 Page 2 Dear purchaser, You have acquired a KX-TCD735EM, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterised by high-security protection against interceptions as well as high-quality digital transmission. This telephone was designed for a wide range of applications. For example, this telephone can be used within a network of base units and handsets, constituting a telephone system which: operates up to 6 handsets at one base unit allows an intercom between 2 handsets allows the operation of a handset at up to 4 base units, expanding the communication radio area. [. . . ] The current setting is at the arrow. Programmable Functions on the Handset Setting the Call Waiting Tone ON/OFF If an incoming call has been received during an intercom, a call waiting tone sounds. 15), and the unit is in the standby mode. 1 2 Press Press . . or until the arrow points 5 6 Press "OFF". Press or . to select "ON" or to "Setting Handset", then press 3 4 Press or until the arrow points . A beep sounds. The display will return to "Call Waiting". To return to the standby mode, press or wait for 60 seconds. You can exit the programming mode any time by pressing . to "Tone Option", press Press or until the arrow points . to "Call Waiting", then press The current setting is at the arrow. 57 KX-TCD735EM(E)-3(50~75) 01. 10. 22 16:15 Page 58 Tone Option with the Handset Setting the Range Warning Alarm ON/OFF The factory preset is OFF. 15), and the unit is in the standby mode. 1 2 Press Press . . or until the arrow points 5 6 Press "OFF". Press . or to select "ON" or to "Setting Handset", then press 3 4 Press or until the arrow points . to "Tone Option", then press Press or A beep sounds. The display will return to "Range Alarm". To return to the standby mode, press or wait for 60 seconds. You can exit the programming mode any time by pressing . until the arrow points . to "Range Alarm", then press The current setting is at the arrow. Setting the Battery Low Alarm ON/OFF The factory preset is ON. 15), and the unit is in the standby mode. 1 2 Press Press . . or until the arrow points 5 6 Press "OFF". or to select "ON" or to "Setting Handset", then press 3 4 Press or until the arrow points . Press . The display will return to "Battery Alarm". To return to the standby mode, press or wait for 60 seconds. to "Tone Option", then press Press or until the arrow points . You can exit the programming mode any time by pressing . to "Battery Alarm", then press The current setting is at the arrow. 58 KX-TCD735EM(E)-3(50~75) 01. 10. 22 16:15 Page 59 Display Option In "Display Option" menu, To select the display backlight colour for the private category (p. 33) is also available. with the Handset Selecting the Standby Mode Display You can select whether to display the currently connected base unit number, handset number or no display in the standby mode. The factory preset is the base unit number. 15), and the unit is in the standby mode. 1 2 Press . Press or until the arrow points to "Setting Handset", then press . Press or until the arrow points . Ex. Base 1 10 New Calls 25. 04 15:00 Chapter 3 3 4 to "Display Option", then press While "Standby Display" is at the arrow, press . [. . . ] Functions like a PBX: More than one operation can be performed at the same time, like a PBX. eg. , during an external call, an internal call or outside call can be transferred to another handset. Multi-Base station operation: More than one handset can be registered to several base units, e. g. , for private and office applications. Equipment Manufacturer's Code (EMC) For identification, this unit is prepared with an EM Code, which can be applied to future operators in mobile networks. 112 KX-TCD735EM(E)-5(101~114) 01. 10. 22 16:17 Page 113 GUARANTEE CONDITIONS OF GUARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. [. . . ]