User manual PANASONIC KX-TCD775

[. . . ] Model No: KX-TCD775E Digital Cordless Answering System Operating Instructions Safety Information . . 52 Caller ID and SMS Compatible Please read before use and save. 15 hours before initial use General Safety Only use the power supply included with the product. Do not connect the AC Adaptor to any AC outlet other than the standard AC220-240V. [. . . ] ZV. Direct Call No. (Enter a Direct Call Number): After a Direct Call phone number has been entered and Direct Call set to ON, you can call the Direct Call number only, by pressing O. If "ON" is selected, is displayed in the standby mode. Private Color (Select the colour of Backlight for each Private Category): You can select the backlight colour for each private category. This backlight colour will display during an incoming external call from a caller saved within a certain pre-programmed category. ZV. Direct ON/OFF (Set Direct Call ON/OFF): ZV. If "ON" is selected, is displayed in the standby mode. Handset Settings Call Option ZV. 01289 8333 Before programming, please follow steps 1 to 4 of `Handset Settings'. Other Option ZV. ZS / U. Change Hset PIN You can change the 4 digit password for the handset. (If the PIN is entered incorrectly, an error tone sounds and display returns to "Enter New PIN". Once you have programmed the password, you cannot confirm it. We recommend you write down the password. If you forget it, please consult our Panasonic Customer Care Helpline. 08700 100 076 R. O. I. 01289 8333 Register H/set (Registering a Handset to a Base Unit)** Cancel Base (Cancelling a Base Unit)** Select Base (Select Base Unit)** **For information on registering handset(s), cancelling and selecting base unit(s), please refer to `For Optional Multi-Unit Users'. Reset Handset (Reset the Handset Settings): You can reset all of the handset settings to their initial factory settings (see `Handset Initial Settings'). If PIN is correct, "NO" is displayed. "CLEARED" is displayed and display returns to settings menu. Auto Talk (Set Auto Talk ON/OFF): If you set Auto Talk to ON, you can answer the phone by lifting the handset off the base unit. ZV. W/T Setting (Select the Walkie-Talkie Mode)* *See `Walkie Talkie'. Helpline Tel. No. 01289 8333 25 Handset Settings Base Unit Settings You can change the base unit settings using a handset near the base unit. Before proceeding with any of the base settings listed in this chapter, the following procedure must initially be carried out: 1 From the standby mode, ZV. 2 ZS / U to select "Setting Base". 3 ZV. "Input Command" is displayed. From this display, follow the instructions after each heading. Please note: Where `Enter PIN' is stated in this chapter, it refers to the 4 digit Base Unit PIN. To exit the menu at any time, ZP. Ringer Mode To select all handsets to ring ZA. [. . . ] For further information on batteries, please refer to main Operating Instructions. Please ensure the batteries are inserted as shown. Network Dependent Features Some features described in these Operating Instructions/Quick Guide are dependent upon subscription to your Network provider (eg. Caller ID, Private Category, SMS Feature, Call Waiting). All features of this type will be marked throughout the Operating Instructions/Quick Guide with this icon. Contact Information If you experience any problems with your product, please contact our Customer Care Helpline (Monday - Friday 9:00am 5:30pm) on: U. K. 01289 8333 Order accessory items for all Communications Products with ease and confidence either by telephoning our Customer Care Helpline or by going online through our Internet Accessory ordering service : www. panasonic. co. uk Most major credit and debit cards are accepted. [. . . ]