User manual PANASONIC KX-TCM947B

[. . . ] or Puerto Rico. Table of Contents Introduction Accessory information . 20 Making/Answering Calls Making calls . 9 PAUSE button (for PBX/long distance service users) . 10 Temporary tone dialing (for rotary/pulse service users) . [. . . ] For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list (see "Editing a caller's phone number before calling back"), then call that number. After that, calls from that caller's area code will be edited automatically. This feature can be turned on or off (page 20). Note: L The unit can remember up to 4 area codes to be edited. Phone numbers from the 4 most recently edited area codes will be automatically edited. L This feature will not be activated until edited numbers are called back. L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again. Editing a caller's phone number before calling back You can edit a phone number in the caller list by removing its area code and/or the long distance code "1". 1 2 3 Press {<} or {>} to enter the caller list. Press {<} or {>} repeatedly to display the desired item. Press {EDIT} ({F2} key) repeatedly until the phone number is shown in the desired format. Feature Ringer volume Ringer tone LCD contrast Key tone Caller ID number auto edit Set dial mode Feature code {1} {6} {0} {1} {6} {1} {1} {4} {5} {1} {6} {5} {2} {1} {4} {1} {2} {0} Setting code {1}: Low {2}: Medium {3}: High* {0}: Off {1}{3}: Tone pattern 1*3 {1}{6}: Level 16 (Default: 3) {1}: On* {0}: Off {1}: On* {0}: Off {1}: Pulse {2}: Tone* Page page 19 page 19 page 19 page 20 page 20 page 8 For assistance, please visit http://www. panasonic. com/consumersupport 17 Programmable Settings Feature Set flash time Feature code {1} {2} {1} Setting code {1}: 900 ms {2}: 700 ms* {3}: 600 ms {4}: 400 ms {5}: 300 ms {6}: 250 ms {7}: 200 ms {8}: 160 ms {9}: 110 ms {0}: 100 ms {*}: 90 ms {#}: 80 ms {1}: English* {2}: Spanish Page page 20 Change language {1} {1} {0} page 19 Programming using the function keys You can program features using the functions keys ({F1}, {F2} and {F3} keys). For your reference, a chart of all programmable functions is printed below. Details for each item can be found on the corresponding pages. Important: L Before programming, make sure the unit is not being used. 1 2 3 4 5 6 7 8 To begin programming, press {MENU} ({F2} key). Press {<} or {>} to scroll through the main menu. Press {SELECT} ({F3} key) to select the desired main menu item. Press {<} or {>} to scroll through the sub-menu. Press {SELECT} ({F3} key) to select the desired sub-menu item. Press {<} or {>} repeatedly to select the desired setting. Press {SAVE} ({F3} key) to save the new setting. Press {STOP} to exit programming mode. Note: L The default settings are indicated by *. [. . . ] This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. in obtaining repairs please ship the product to: Panasonic Services Company Customer Servicenter 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. [. . . ]