User manual PANASONIC KX-TD208E

[. . . ] EIA Remote & Diagnosis Program p User Guide Please read these instructions before using the EIA software. Model KX-TD208E Contents CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INITIAL MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SYSTEM DATA IN THE KX-TD208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SYSTEM DATA IN THE FILE ON DISK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] <Condition> (1) If the password is wrong, an error message appears after pressing the ENTER key. Re-enter the correct one and press the ENTER key again. (2) An error message appears when something is wrong with the line. Check the line and then press the ENTER key again. 1 through 2 Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600 NL Code CR+LF or CR Word Length 7 or 8 bits Parity None, Mark, Space, Even, Odd Stop Bit 1 bit or 2 bits Password 0 through 9 4, 5, 6 or 7 digits Programming the System Data in the file on Disk <Operation> (1) Enter the drive letter and directory. (2) Press the F8(EXIT) key to return to the initial screen. (3) File names are displayed when the file extensions of them are ". DBE" and ". DBA". The files whose file extensions are ". DBA" are ASCII files for printing. (4) - To load a database file into the memory of the PC 1 Select a file with the Up or the Down key and press the ENTER key. 2 When you select a file with ". DBE", loading starts. When it is completed, "Main Menu" appears. If you select a file with ". DBA", an error message "Data Base file error" appears. System Data Programming Main Menu 00. << Getting Started >> Some settings are required for basic operation. This leads you to the setting screen depending on your contract with the telephone company. ISDN Port Setting Assigns features to each ISDN port. - ISDN Configuration - Connection Assignment(for CO use) - Intercept Extension Number -Day/Night(for CO use) - Host PBX Access Code(for CO use) - Subscriber Number Assignment(for CO/P-P use) - Direct Dialling In Service(for CO/P-P use) - DDI Number/Extension Number Transformation(for CO/P-P use) - Multiple Subscriber Number Set(for CO/P-MP use) - Extension Ringing Assignment for ISDN -Day/Night(for CO/P-MP use) System Data Programming Main Menu 02. Station Setting Assigns features to each extension. - Name - Connection Assignment - Extension Group Number - Doorphone Ringing -Day/Night - Extra Device Port - Class of Service Number -Primary/Secondary - Data Line Security - Department Code - Charge Limit - TAM Connection Assignment - Outgoing Call Permission -Day/Night - Extension Ringing Type (NORMAL) -Day/Night - Intercept Routing Assignment 03. Class of Service - Toll Restriction Level - Day/Night - Toll Restriction Level for System Speed Dialling - Day/Night - Extension-to-CO Line Call Duration Limit - Call Forwarding to CO Line - Call Forwarding - Follow Me - Account Code Entry Mode - Do Not Disturb Override - Door Opener Access - Night Service Access - Do Not Disturb for Direct Dialling In Call - Calling Line Identification Restriction - Connected Line Identification Restriction 05. System Speed Dial Table - Name - Telephone Number 06. Account Code Table System Data Programming Main Menu 07. Timer - Hold Recall Time - Transfer Recall Time - Call Forwarding - No Answer Time - Intercept Time - Pickup Dial Waiting Time - Door Release Time - Message Waiting Ring Interval Time 08. [. . . ] (4) Saving starts and a message "Now saving system data" appears when the PC is connected to the KX-TD208. Connecting Status turns into "On-line(RS-232C)". When saving is completed, hit any key to go back to "Save Menu". <Condition> (1) If the password is wrong, an error message appears after pressing the ENTER key. Re-enter the correct one and press the ENTER key again. [. . . ]