User manual PANASONIC KX-TD7580CE

[. . . ] Q Predialling: You can dial first, and then go off-hook. Receiving an outside call from a caller registered in the phonebook, the caller's name and phone number will appear on the display. To an outside party line access code During an outside call or while dialling, you can transmit tone signals automatically using the keypad (e. To clear the selected number To clear all numbers Turning the Handset Ringer off Temporarily Ringer will turn back on for the next call. [. . . ] *2 You can turn on/off the handset key sound (key tone, confirmation tone, error tone). You can turn on/off the range warning alarm. You can choose whether to display the currently connected base unit number, extension number or no display while in the standby mode. You can choose one of 12 display languages. You can set the display backlight colour to green, orange, or red. You can select the display backlight colour (red, orange, or green) for each private category. You can select the display contrast level from 1 to 3. You can avoid adding the line access code to the outside numbers in the phonebook, by setting the base access code (max. You can prohibit anyone from entering the phonebook. *3 When locked, you cannot dial from the phonebook. You can answer a call by lifting the handset off the charger without pressing a button. You can clear the settings on the handset. When selected, Handset Programming settings will return to their initial settings. *3 You can also clear Handset receiver volume and Redial memory. *2 You must choose the desired private category. After your batteries are fully charged: Operation While in use (Talk) While not in use (Standby) Approx. Ni-MH battery life Up to about 15 hours Up to about 120 hours Q Battery life may be shortened depending on usage conditions, such as: ­when talking in speakerphone mode, using headset and ambient temperature. Q Clean the handset and the charger contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the batteries may not charge properly. " Replacing the Batteries If " " flashes after a few telephone calls even when the handset batteries have been fully charged, it is time to replace the batteries with new ones (p. Before replacing the batteries, turn the power off to prevent memory loss (p. [. . . ] Noise Occasional noise or interference may occur due to other sources of electromagnetic radiation, such as refrigerators, microwave ovens, faxes, TVs, radios, or personal computers. If noise disturbs your telephone calls, keep the Handset away from other electrical appliances. The illustrations used in this manual may slightly differ from the original device. This device complies with the requirements of the directive 1999/5/EC. [. . . ]