User manual PANASONIC KX-TD7680

[. . . ] 2. 4 GHz Portable Station Operating Instructions Model No. KX-TD7680 Thank you for purchasing the Panasonic KX-TD7680, 2. 4 GHz Portable Station. Please read this manual carefully before using this product and save this manual for future use. This manual is designed to be used with your Portable Station and a Panasonic KX-TDA series Business Telephone System. Charge the battery for about 7 hours before initial use. Document V ers ion: 2006-02 Before Initial Use Please read "IMPORTANT SAFETY INSTRUCTIONS" on page 44 before use. Registration Your Portable Station (PS) must be registered in the Business Telephone System and assigned an extension number before initial use. Accessories ( -included/ Charger -optional) AC adaptor (KX-TCA1) Battery (N4HHGMB00005 or HHR-P103) One Screws and Washers One Operating Instructions Belt Clip One To attach Two One One Carrying Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Refer to the Business Telephone System User Manual) For further information, refer to the Business Telephone System User Manual. 32 Programming Changing the Initial Settings You can customize the PS by editing the settings found under "PS PROGRAM" in the menu list, as follows: Enter a setting number. (See below. ) OR OPER Press FUNC. Press 0. Select the desired main item. Press ENTER. Select the desired sub item. Press ENTER. Select the new setting. Press ENTER. To return to the previous menu, press . The unit will beep to indicate that the new settings have been saved. PS Program Menu Layout 11 12 13 14 15 16 17 18 19 21 22 23 24 25 26 27 RNG PATTERN-INT RNG PATTERN-CO RNG PATTERN-GRP VIBRATION&RING QUICK ANSWER AUTO ANSWER AUTO ANS DELAY CALL GROUP ANY KEY ANSWER BACKLIGHT BACKLIGHT TIME LANGUAGE STANDBY DISPLAY DATE/TIME LCD CONTRAST CID DISPLAY PS PROGRAM ANSWER SET DISPLAY SET BEEP SET 31 KEY TONE 32 RANGE WARNING 41 42 43 44 51 52 53 54 55 56 6 DIRECTORY LOCK PS PASSWORD MEMORY CLEAR ALL PS-BOOK DEL REGISTRATION DELETE SYSTEM SYSTEM LOCK ACCESS SYSTEM CHANGE PIN TRUNK ACCESS CD SECURITY SET SYSTEM SET FCO LABEL EDIT 33 Programming Main Item ANSWER SET Sub Item RNG PATTERN-INT Description Setting* Setting no. RNG PATTERN-CO Select the ringer type for each type of call (intercom, outside, and group). 6 ringer tones and 4 melodies are available. Ringer Pattern no. 11 12 Ringer Pattern 1 (Bell 1) RNG PATTERN-GRP 13 VIBRATION&RING Select whether to have the PS vibrate when ringing. OFF Ring&VIB (Ring and vibrate at the same time) VIB RING (Vibrate for 5 seconds then ring) 14 QUICK ANSWER You can answer a call by just lifting the PS off the charger. Select the type of calls to be automatically answered when AUTO ANSWER is turned on. (See page 10. ) ON 15 OFF INT ONLY (Intercom calls only) AUTO ANSWER 16 INT/CO (All calls) * The default setting is shown here in gray. 34 Programming Main Item ANSWER SET Sub Item AUTO ANS DELAY Description Setting* Setting no. Select the number of seconds (6-20 sec. ) before a call is automatically answered, when AUTO ANSWER is turned on. You can set the ringer, LED, and vibration for calls from someone stored in one of groups. A group's settings can also be returned to the default. The following four items will be displayed. Select a ring pattern for the group selected above. When set to CO/GRP-PATTERN, the ringer chosen in RING PATTERN-CO (setting number 12) will be used. Select an LED pattern for the group selected above. When set to CO/GRP-BLINK, the LED will light as shown on page 18. Select a vibration pattern for the group selected above. 6s 17 _s CALL GROUP Select a group (0-9) RING PATTERN CO/GRPPATTERN Ringer Pattern no. 18 LED PATTERN CO/GRPBLINK LED Pattern no. SINGLE Vibration Pattern no. VIB PATTERN DEFAULT SETTING Returns the ringer, LED, and vibration settings for the group selected above to the default settings. NO YES * The default setting is shown here in gray. 35 Programming Main Item ANSWER SET Sub Item ANY KEY ANSWER Description Setting* Setting no. When set to ON, allows you to answer a call by pressing any dial button (0-9, , #). Select whether or not the keypad and display backlight will illuminate when a key is pressed or a call is received. Select "INRECEIVING" to have the dial buttons and backlight illuminate only when a call is received. Select how many seconds the keypad and display backlight will remain illuminated. ON 19 OFF ON INRECEIVING OFF DISPLAY SET BACKLIGHT 21 BACKLIGHT TIME 5s 10 s 15 s 20 s 25 s 30 s 22 LANGUAGE Select which language your PS will display. When set to AUTO, the language settings of the Business Telephone System will be used. AUTO ENGLISH 23 ESPANOL FRANCAIS * The default setting is shown here in gray. 36 Programming Main Item DISPLAY SET Sub Item STANDBY DISPLAY Description Setting* Setting no. Select whether the PS will show its extension number or the system number on the display when in standby mode. You can also choose to display neither. EXTN (Extension no. ) SYS-NO. (PBX no. ) 24 OFF DATE/TIME Select the format for the date shown on the display in standby mode. DATEMM/DD 12H DATEMM/DD 24H DATEMM/DD/YY DATEDD/MM 12H DATEDD/MM 24H DATEDD/MM/YY 25 LCD CONTRAST Select one of 12 levels of contrast for the display. LEVEL _ 26 LEVEL 6 * The default setting is shown here in gray. 37 Programming Main Item DISPLAY SET Sub Item CID DISPLAY Description Setting*1 Setting no. Select which caller information is displayed. Either the information stored in the system, or the information stored in the PS dialing directory can be displayed. [. . . ] Consult your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. 45 Important Information The software contained in this equipment to allow user access to the network must be upgraded to recognize newly established network area codes and exchange codes as they are placed into service. Failure to upgrade the premises systems or peripheral equipment to recognize the new codes as they are established will restrict the customer and the customer's employees from gaining access to the network and to these codes. Environment -- do not place the unit in rooms where the temperature is less than 5 C (41 F) or greater than 40 C (104 F). Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight. [. . . ]