User manual PANASONIC KX-TG1000N

[. . . ] 2. 4GHz Multi-Handset Cordless Phone System Model No. Preparation Basic Operation Advanced Operation Useful Information KX-TG1000N Pulse-or-tone dialing capability Operating Instructions Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 12 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 74 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting. Attach your purchase receipt here. [. . . ] ( Pause ) more than once increases the length of the pause between ·Pressing numbers. FLASH Button Pressing /(FLASH) on the handset or (FLASH) on the base unit allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. The flash time is 650 ms (milliseconds). 46 For Call Waiting Service Users Press /(FLASH) on the handset or (FLASH) on the base unit if you hear a call-waiting tone while talking. ·The first call is put on hold and you can answer the second call. ·To return to the first caller, press /(FLASH) on the handset or (FLASH) on the base unit again. ·The call waiting service cannot be used when a parallel connected telephone is in use. ·If this function does not operate properly, consult your telephone company for details. Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows your unit to display the second caller's information. After you hear a call-waiting tone while talking, the unit will display the caller's name with the phone number, the time and date the call was received. JACK SMITH 1-222-333-4444 3:10A Jun10 ·Please contact your telephone company for details and availability in your area. Temporary Tone Dialing Advanced Operation (For Rotary or Pulse Service Users) Press (TONE) before entering access numbers which require tone dialing. ·The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. Muting Your Conversation Handset: Press ( MUTE ) while talking. ·The display on the right will be shown. 1M Base unit: Press (MUTE) while talking. ·The MUTE indicator lights. VOL MICROPHONE MUTED HOLD MUTE ·The other party cannot hear your voice but you can hear theirs. ( MUTE ) on the handset or (MUTE) on the ·To resume the conversation, press base unit again. 47 Other Programmable Settings Selecting the Range Extender Mode This feature allows the unit to improve both the sound quality and range when using in an area with excessive interference or requiring a moderate increase in operating range. Your phone comes from the factory set to AUTO. You can select the range extender to: OFF ON AUTO The range extender is not active. The range extender is active and "E" (extender icon) is displayed on the display. The range extender will automatically monitor the signal strength between the handset and base unit, and active whenever necessary. "E" is displayed on the display when the mode is active. Make sure that the handset is in the standby mode initially. 1 2 3 4 Press ( MENU ) . CALLS LOG HANDSET SETTINGS RANGE EXTENDER REGISTER F ) to select ) or ( Press ( "RANGE EXTENDER", and press ( OK ) . ) or ( Press ( "ON", "OFF" or "AUTO". ) to select OK G OFF ON AUTO F OK G Press ( OK ). ·A beep sounds. ·The display will return to the standby mode. Ex. E HANDSET 1 RDL MENU MEM ·Battery life may be shortened if you set the range extender to ON or AUTO. 48 Selecting the Ringer Melody You can select the desired ringer melody of the handset and base unit from #1 to #6. Your phone comes from the factory set to pattern #01. Programming must be carried out separately for the handset and base unit. Make sure that the unit is in the standby mode initially. With the handset With the base unit 1 2 3 4 Press ( MENU ) . 1 2 3 Press (*) three times. ·A beep sounds, POWER and IN USE indicators flash quickly on the base unit. ) to ) or ( Press ( select "HANDSET SETTINGS", and press ( OK ) . [. . . ] This will often reduce, or eliminate, interference. Operating near 2. 4GHz electrical appliances may cause interference. Move away from the electrical appliances. CAUTION: To comply with FCC RF exposure requirements, the base unit should be installed with its antenna located at 20 cm or more from persons and handset should be carried with the specific belt-clip provided for the handset to ensure compliance. [. . . ]