User manual PANASONIC KX-TG1100CX

[. . . ] TG1100_1102CX(e-e). book Page 1 Tuesday, August 29, 2006 10:30 AM Operating Instructions Digital Cordless Phone Model No. KX-TG1100 KX-TG1100CX KX-TG1102CX Charge the batteries for about 7 hours before initial use. Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Making/Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Phonebook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] i {>} Press {e} or {v} to select the desired item in the handset settings menu. i {>} Press {e} or {v} to select the desired item in the sub-menu. i {>} Press {e} or {v} to select the desired setting, or follow the instructions in the "Feature" column of the chart. Sub-menu SET TIME Feature (default setting) Set time alarm. L Set the date and time beforehand (page 8). - Enter the desired hour and minute (24hour time entry). i {>} Change alarm frequency ("OFF"). Handset ringer volume (level 6) Ringer type for external calls ("RING TYPE 1") Ringer type for internal calls ("RING TYPE 1") Ringer type for page ("RING TYPE 1") Ringer type for alarm ("RING TYPE 1") Keytones on/off ("ON") Call waiting tone on/off ("ON") Range alarm on/off ("OFF") Battery low alarm on/off ("ON") Standby mode display ("CLOCK") Talk mode display ("TALK TIME") Display language ("ENGLISH"): page 8 Call bar on/off ("OFF")*1 - Enter handset PIN (default: "0000"). *2 - Select the desired setting. i {>} Store direct call number. *3 - Enter a phone number (24 digits max. ). - {j/OK} 2 times i "ON" i {>} Direct call on/off ("OFF") Handset settings menu TIME ALARM SET ALARM RINGER OPT RINGER VOL EXT RINGER INT RINGER PAGING ALARM TONE OPT KEY TONE CALL WAITING RANGE ALARM BATTERY LOW DISPLAY OPT STANDBY MODE TALK MODE LANGUAGE CALL OPT CALL BAR DIRECT NO SET DIRECT 12 TG1100_1102CX(e-e). book Page 13 Tuesday, August 29, 2006 10:30 AM Useful Telephone Settings Handset settings menu OTHER OPT Sub-menu HSPIN CHANGE Feature (default setting) Change handset PIN ("0000"). *4 - Enter the current 4-digit handset PIN. *2 - Enter the new 4-digit handset PIN. - Enter the new 4-digit handset PIN again. Auto talk on/off ("OFF")*5 Reset handset to its default settings. - Enter handset PIN (default: "0000"). *2 - {v} i {>} AUTO TALK RESET HS ---------- *1 Call bar feature prohibits making outside calls. When call bar is turned on, only emergency calls can be made. To store emergency numbers, see page 14. *2 If you forget your PIN, consult your nearest Panasonic service centre. *3 Direct call feature allows you to dial a preset phone number simply by pressing {C}. *4 If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. *5 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}. Guide to base unit settings To customise the base unit: 1 {j/OK} 2 Press {e} or {v} to select "SETTING BS". i {>} L "INPUT CODE" is displayed. 3 Enter the desired code number. Follow the instructions in the "Feature" column of the chart. [. . . ] We recommend connecting a filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack. L You are using the handset or base unit in an area with high electrical interference. Place the handset and base unit away from interference sources, such as antennas and mobile phones. L The redialled number was more than 24 digits long. [. . . ]