User manual PANASONIC KX-TG1311FX

[. . . ] TG1311_1312FX(e). book Page 1 Tuesday, August 5, 2008 7:18 PM Operating Instructions Digital Cordless Phone Model No. KX-TG1311FX KX-TG1312FX Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Making/Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Character table Keys {1} {2} {3} {4} {5} Characters # [ ] *, ­ / 1 ABC2 DEF3 GHI J KL 4 5 Keys {6} {7} {8} {9} {0} Characters MNO6 PQRS7 TUV8 WX Y Z 9 (Space) 0 1 2 3 4 {j/OK} 2 times Enter the party's phone number (24 digits max. ). i {j/OK} Enter the party's name (9 characters max. ). i {j/OK} Temporary tone dialling (for rotary/pulse service users) You can temporarily switch the dialling mode to tone when you need to access touch-tone services (for example, telephone banking services). 1 2 Make a call. Press {*} when prompted to enter your code or PIN, then press the appropriate dial keys. L The dialling mode will return to pulse when you hang up. Note: L To enter another character located on the same dial key, press {>} to move the cursor to the next space, then press the appropriate dial key. Editing/correcting a mistake 1 2 12 Press {<} or {>} to move the cursor to the right of where you want to correct the number/character. {C} i Enter the correct number/character. TG1311_1312FX(e). book Page 13 Tuesday, August 5, 2008 7:18 PM Phonebook Making calls/editing/erasing 1 2 {k} i {v}/{e}: Select the desired entry. Making calls: {C} Editing: {>} i {v}/{e}: "EDIT" i {>} i Edit the phone number. i {j/OK} Erasing: {>} i {v}/{e}: "CLEAR" i {>} i {v}/{e}: "YES" i {>} i {ih} One touch dialling (Hot key) Assigning an entry in the phonebook to a one touch dial key Dial keys {1} to {9} can each be used as a one touch dial key, allowing you to dial a number from the phonebook by simply pressing a dial key. 1 2 3 4 1 2 {k} i {v}/{e}: Select the desired entry. i {j/OK} {v}/{e}: "HOT KEY REG" i {>} {v}/{e}: Select the desired dial key. i {>} L If the dial key is already assigned as a one touch dial key, the displayed number flashes. {v}/{e}: "YES" i {>} i {ih} Making calls/cancelling a one touch dial assignment Press and hold the desired one touch dial key ({1} to {9}). Making calls: {C} Cancelling a one touch dial assignment: {>} 2 times i {v}/{e}: "YES" i {>} i {ih} 13 TG1311_1312FX(e). book Page 14 Tuesday, August 5, 2008 7:18 PM Useful Telephone Settings Useful Telephone Settings Guide to handset settings To customise the handset (general approach): Menu DISPLAY OPT Sub-menu STANDBY MODE <CLOCK> TALK MODE <TALK TIME> LANGUAGE <ENGLISH> CALL BAR <OFF> DIRECT NO SET DIRECT <OFF> HSPIN CHANGE <0000> AUTO TALK*2 <OFF> -- Page -- -- 10 15 15 -- 15 -- 15 1 2 3 4 5 {j/OK} Press {v} or {e} to select "SETTING HS". i {>} Press {v} or {e} to select the desired item in the handset settings menu. i {>} Press {v} or {e} to select the desired item in the sub-menu. i {>} OTHER OPT CALL OPT Press {v} or {e} to select the desired setting. i {>} L This step may vary depending on the feature being programmed. Note: L In the following table, < > indicates the default settings. Menu TIME ALARM Sub-menu SET TIME SET ALARM <OFF> RINGER OPT RINGER VOL <level 6> EXT RINGER*1 <RING TYPE 1> INT RINGER <RING TYPE 1> PAGING <RING TYPE 1> ALARM <RING TYPE 1> TONE OPT KEY TONE <ON> CALL WAITING <ON> RANGE ALARM <OFF> BATTERY LOW <ON> Page 14 -- -- -- -- -- -- -- -- -- -- RESET HS *1 If you select a melody for the external ringer tone, the ringer continues to sound until the melody finishes even when another person answers the call using another phone connected to the same line. If you want the handsets to stop ringing at the same time, select ringer tone number 1. *2 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit or charger. If you subscribe to a Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. Alarm An alarm sounds at the set time for 3 minutes. [. . . ] After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact your nearest Panasonic service centre. Registering the handset to the base unit 1 2 3 4 5 {j/OK} {v}/{e}: "SETTING HS" i {>} {v}/{e}: "REGISTRATION" i {>} {v}/{e}: "REGISTER HS" i {>} Press and hold {x} on the base unit for about 5 seconds. [. . . ]