User manual PANASONIC KX-TG2122W

[. . . ] Introduction 1 Introduction Thank you for purchasing a Panasonic cordless telephone. 4 Important safety instructions When using the product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. Follow all warnings and instructions marked on the product. Unplug the product from power outlets before cleaning. Do not use the product near water, for example near a bathtub, wash bowl, kitchen sink, etc. [. . . ] ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference. Cause/solution - Make sure the battery is installed correctly and fully charged. - Unplug the base unit's AC adaptor to reset the unit. - Place the handset on the base unit and try again. - Confirm the telephone line cord is properly connected. - Disconnect the unit from the telephone line and connect a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your telephone service provider. Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily be pressing [ # ]. Handset locator You can locate the handset or page the handset user with beep tones from the base unit. The handset beeps for 1 minute and "PAGING" is displayed on the handset. 2 Base unit: To stop paging, press [LOCATOR] again. Handset: To stop paging, press [OFF]. I cannot hear a dial tone. Editing a caller's phone number before calling back You can edit a phone number in the caller list by removing its area code and/ or the long distance code "1". 1 Press [ ] or [ ] to enter the caller list. 2 Select the desired item by using [ ] or [ ]. 3 Press [EDIT] repeatedly until the phone number is shown in the desired format. (1) Local phone number Example: 321-5555 (2) Area code - Local phone number Example: 555-321-5555 (3) 1 - Area code - Local phone number Example: 1-555-321-5555 ]. 4 Press [ Note: · The number edited in the step 3 is not maintained in the caller list. 12 Call transfer (KX-TG2122 only) During an outside call, you may transfer the outside call to another handset. Handset 1: Press [TRANSFER] on the originating handset. [. . . ] - In order to use Caller ID, Call Waiting, or Call Waiting Caller ID (CWID), you must first contact your telephone service provider and subscribe to the desired service. After subscribing, you may need to contact your telephone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). Call Waiting Caller ID display If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd caller's information is displayed after you hear a Call Waiting tone. Please contact your telephone service provider for details and availability of this service in your area. Storing names and numbers 1 Press [FUNCTION]. 2 Press a memory station number [ 0 ] to [ 9 ]. · If an item is already stored, that information is displayed. [. . . ]