User manual PANASONIC KX-TG2216B

[. . . ] 2. 4 GHz Digital Cordless Phone Preparation Basic Operation Advanced Operation Operating Instructions Model No. KX-TG2216FV KX-TG2216RV KX-TG2216SV Pulse-or-tone dialing capability KX-TG2216FV Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. Please read IMPORTANT SAFETY INSTRUCTIONS on page 46 before use. Read and understand all instructions. Caller ID, Call Waiting and Voice Mail Service, where available, are telephone company services. [. . . ] After the voice mail box has received messages, "Voice Mail" will be displayed on the handset and the VM (Voice Mail) indicator on the base unit will flash. To use this feature, you must first store your voice mail access number. Storing a Voice Mail Access Number 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [ ] > or [ ], then press Select. > Initial setting > > 3 Scroll to "Voice Mail" by pressing [ ] or > [ ], then press Select. Voice Mail Back Select > 4 Press Select at "Store VM access#". 5 Enter your access number, up to 32 digits. · Each time you press , a digit is erased. To erase all of the digits, press and hold . · If a pause is required for dialing, press P*. v v > Store VM access# Back Select Example 1234567PPP890 v MENU=Save > Exit Select > > P 6 Press [MENU] to save your setting, then press [OFF]. *For quick access to your voice mail box, you may add pauses between your voice mail box access number and your mail box password in step 5. 1-222-333-4444 PPPP 8888 Your voice mail box access number Pauses Your mail box password Pressing P once creates a 3. 5 second delay and counts as one digit. The delay time depends on your telephone company. To erase a stored voice mail access number Repeat steps 1 to 4, then press and hold Press [MENU], then press [OFF]. v until all of the digits are erased. 32 Voice Mail Service Setting Voice Mail (VM) Tone Detection Your telephone company sends special signals (Voice mail tones) to activate the VM indicator. Press [ ] or [ ] to listen to the dial tone. If you hear a pulsating tone followed by a continuous dial tone, this is an indication that a new message was recorded. Your phone comes set to detect these tones (set to ON). After you hang up or the phone stops ringing, your unit will seize the phone line and check if a message has been recorded. If a new message was recorded at your telephone company, "Voice Mail" will be displayed on the handset and the VM indicator on the base unit will flash. Set this programming to OFF when: -- you do not subscribe to a voice mail service, -- your telephone company does not send a pulsating tone, followed by a continuous dial tone, or -- your unit is connected to a business or office telephone system (PBX). If you are not sure which setting is required, consult your local telephone company or contact the Panasonic Customer Call Center. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [ ] > or [ ], then press Select. 3 Scroll to "Voice Mail" by pressing [ ] or > [ ], then press Select. > Initial setting Exit Select > > Voice Mail Back Select > > > Advanced Operation 4 Scroll to "VM tone detect" by pressing [ ] > or [ ], then press Select. > VM tone detect Back Select > > VM tone detect :On Back Save 5 Select "Off" or "On" by pressing [ ] or [ ]. > > 6 Press Save, then press [OFF]. > For assistance, please call: 1-800-211-PANA(7262) > 33 Voice Mail Service Listening to Voice Mail Messages After the voice mail box has received messages, the unit will indicate it in two ways: (a) "Voice Mail" will be displayed on the handset, and (b) the VM indicator on the base unit will flash. Handset on the base unit Voice Mail To listen to your voice mail message(s) 1 Press [MENU]. access" by pressing [ ] or > [ ], then press Select. · The unit is connected to the telephone line and dials the access number (p. · If 3 beeps sound and "Store VM access#" is displayed, a voice mail access number is not stored. To store the number, see page 32. Example 1234567PPP890 (VE) Hold 3 Follow the pre-recorded instructions. 4 When finished, press [OFF]. · You can also listen to your voice mail message(s) by using [ ] or [ 1. [. . . ] (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only. ) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. [. . . ]