User manual PANASONIC KX-TG2226W

[. . . ] 2. 4 GHz Digital Cordless Answering System Preparation Cordless Telephone Answering System Operating Instructions Model No. KX-TG2226BV KX-TG2226SV KX-TG2226WV Pulse-or-tone dialing capability KX-TG2226BV Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. Please read IMPORTANT SAFETY INSTRUCTIONS on page 61 before use. Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. [. . . ] · If noise interferes with the message playback: -- during playback using [ ], press [ ] (Channel). -- during playback using [ ], press [ ] (Channel). · At the end of the last message, "End of final message" is heard. The unit will announce the remaining recording time if it is less than 3 minutes. · If the unit starts to ring during the remote operation, press [ ] or [ ] to answer the call. To playback, start again from the beginning after hanging up. · If you hear "Memory full" after playback, erase unnecessary messages (p. 44). Voice menu If you do not press any buttons at the end of the last message, the unit will announce "End of final message" and the voice menu will begin. The unit announces, "Press 4 to play back new messages. Press 5 to play back all messages. " · You can press buttons for other options (p. · If you do not press any buttons within 10 seconds, the handset will exit remote operation. 42 > Exit Select > Listening to Messages During playback > To adjust the speaker volume Base unit or Handset: To increase volume, press [ ]. To decrease volume, press [ ]. · You can also adjust the receiver volume on the handset. To slow down the playback speed (Slow Talk Message Playback) Base unit: Press [MESSAGE/SLOW TALK]. Handset: Press [3]. · To return to normal speed, press [MESSAGE/ SLOW TALK] on the base unit or [3] on the handset. · Each time you press the button during playback, the speed will change to slow/normal. · Playback speed will return to normal after you finish listening to messages. To repeat a message Base unit: Press [REPEAT]. Handset: Press Repeat or [1]. · If pressed within the first 5 seconds of playback, the previous message will be played. > To skip message Base unit: Press [SKIP]. Handset: Press Skip or [2]. To stop playback Base unit: Press [STOP]. · To resume playback, press [MESSAGE/SLOW TALK]. · If you do not press any button for 60 seconds or if you press [STOP] again, playback mode will be canceled. Answering System Handset: Press [9]. · If you do not press any button within 15 seconds after stopping playback, the voice menu will start (p. 26) During playback, when the handset is on the base unit, the handset display will show the name and/or number of the caller whose message is being played. To call back the displayed number: During playback, lift the handset and press Call, [ ] or [ ] within 10 seconds. · The unit stops playback and dials the phone number. · After listening to a new incoming message, "" will be added to its call entry in the Caller List (p. 28). For assistance, please call: 1-800-211-PANA(7262) 43 Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 3 minutes. [. . . ] For warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (7262). When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. [. . . ]